>> Body electric equipment
>> Heating and air conditioning system
>> Heater radiator
Heater radiator on cars Amigo/MU/Jazz and Rodeo/Passport
|1 – draughts and the lever заслонки the strengthened heating of glass
2 – a plate and a sealant
3 – a radiator
4 – the lever mixing заслонки
5 – sector of installation of the basic mode of ventilation of salon
6 – a drive
7 – the lever заслонки the ventilating channel
8 – the lever заслонки a heater
|9 – a drive делительной заслонки
10 – the left casing
11 – the right casing
12 – a back casing
13 – an air line
14 – заслонка for heating of feet
15 – заслонка the lateral ventilating channel
16 – distributive заслонка
17 – заслонка the strengthened heating of glass
Heater radiator on cars Trooper/Bighorn
|1 – a spring заслонки the strengthened heating of a windscreen
2 – draught and the lever заслонки the strengthened heating of glass
3 – the relay
4 – the conditioner resistor
5 – a plate and a sealant
6 – a bar of the valve of a cooling liquid
7 – a radiator
8 – the lever mixing заслонки
9 – sector of installation of the basic mode of ventilation of salon
10 – a drive
11 – the lever заслонки the ventilating channel
|12 – the lever заслонки a heater
13 – a diaphragm of heating of glass
14 – fastening details
15 – a drive mixing заслонки
16 – a sealant
17 – the left casing
18 – the right casing
19 – заслонка for heating of feet
20 – заслонка the lateral ventilating channel
21 – mixing заслонка
22 – заслонка the strengthened heating of glass
CARS AMIGO/MU/JAZZ, TROOPER/BIGHORN AND RODEO/PASSPORT
Extraction of a radiator of a heater from a casing
| PERFORMANCE ORDER
| 1. Disconnect the battery from weight.
|2. Merge cooling liquid.
| 3. Disconnect from a heater hoses. It is forbidden to pull hoses with the big effort as it is possible to damage a radiator. If the hose does not give in to removal cut off it.
|4. Remove the panel of devices.
|5. Disconnect the resistor.
|6. For access to a radiator displace an air line or the evaporator case to the right (if there is a conditioner). On cars with the conditioner for this purpose it is required to depressurize a coolant highway.
|7. Remove an arm of the panel of devices and a heater radiator.
|8. Remove from a radiator an air line and a distributive casing.
| PERFORMANCE ORDER
| 1. Collect a radiator with an air line and a distributive casing.
|2. Establish a radiator of a heater and an arm of the panel of devices.
| 3. Attach to a radiator an air line or the evaporator case (if there is a conditioner). On cars with the conditioner collect and fill a coolant highway (it is carried out in car-care centre service).
|4. Attach the resistor.
|5. Establish the panel of devices.
|6. Attach to a heater hoses.
|7. Fill in cooling liquid.
|8. Connect the battery to weight, be convinced of absence of a leak.