Isuzu Trooper>> Body electric equipment>> The receiver

10.2. The receiver
THE GENERAL DATA

Details of installation of the receiver on cars Amigo/MU/Jazz

1 – the forward panel
2 – food and aerial sockets
3 – fastening screws
4 – the receiver
5 – an arm and a bolt

Details of installation of the receiver on cars Trooper/Bighorn

1 – the handle, a nut and a washer
2 – the panel
3 – screws of fastening of the case of the receiver
4 – a socket with wires
5 – screws of fastening of the receiver to an arm
6 – the receiver
7 – an arm and a bolt
8 – screws of fastening of the aerial
9 – the aerial in gathering
10 – screws forward dynamics
11 – sockets
12 – forward динамик
13 – screws back dynamics
14 – back динамик
15 – sockets

CARS AMIGO/MU/JAZZ

Removal

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Remove the forward panel and disconnect food and aerial sockets.
3. Turn away screws and get the receiver in gathering with an arm.
4. Turn away a bolt and remove an arm.

Installation

PERFORMANCE ORDER
1. Establish on the receiver an arm, wrap a bolt.
2. Establish the receiver in gathering with an arm, wrap screws.
3. Attach food and aerial sockets, establish the forward panel.
4. Connect the battery to weight.

CARS TROOPER/BIGHORN

Removal

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Remove fine tuning handles, turn away a nut and remove washers.
3. Remove a casing, the panel, turn away screws and remove the receiver.
4. Disconnect all sockets.
5. Remove an arm from the receiver chassis.

Installation

PERFORMANCE ORDER
1. Establish an arm on the receiver chassis.
2. Attach sockets.
3. Establish on the receiver a casing, the panel, wrap screws.
4. Establish fine tuning handles, having dressed washers and having wrapped nuts.
5. Connect the battery to weight.