Isuzu Truper - Isuzu Trooper
1. The maintenance instruction
2. Maintenance service
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and a running gear
7. A suspension bracket and a steering
8. Brake system
9. A body
10. A body electric equipment
   10.1. Heating and air conditioning system
   10.2. The receiver
   10.3. The electric motor of a screen wiper of a windscreen, draught of a drive of brushes
   10.4. The electric motor of a screen wiper of back glass
   10.5. Devices and switches
      10.5.1. A guard of devices
      10.5.2. A speedometer
      10.5.3. The index of level of fuel
      10.5.4. The gauge of level of fuel
      10.5.5. The forward panel
      10.5.6. The switch of a screen wiper of a windscreen
      10.5.7. The switch of a screen wiper of back glass
      10.5.8. The switch of headlights
      10.5.9. The switch of light of headlights
      10.5.10. The ignition switch
      10.5.11. A cable of a drive of a speedometer
      10.5.12. Light devices
      10.5.13. Devices of the light alarm system
      10.5.14. The list of the lamps applied in car Trooper/Bighorn
      10.5.15. The list of the lamps applied in car Rodeo
   10.6. Cruise-control
   10.7. The deblocking device
   10.8. Devices of protection against overloads
11. Diagnostics of malfunctions
12. Electroschemes





Isuzu Trooper>> Body electric equipment>> Devices and switches

10.5. Devices and switches

10.5.1. A guard of devices
THE GENERAL DATA

Guard of devices Trooper/Bighorn

Guard of devices Amigo/MU/Jazz, Rodeo/Passport


Removal

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Lower a steering wheel in the bottom position (if such design is provided).
3. Turn away screws of fastening of a guard of devices, pull a guard on itself and disconnect a socket from the switch of external illumination.
4. Disconnect from the switch sockets of a screen wiper and стеклоомывателя.
5. Get a guard of devices from the forward panel.

Installation

PERFORMANCE ORDER
1. Establish a guard.
2. Attach sockets of a screen wiper and стеклоомывателя.
3. Attach a socket to the switch of external illumination.
4. Connect the battery to weight, check up work of devices.

Check

CARS AMIGO/MU/JAZZ, RODEO/PASSPORT LATE RELEASE

PERFORMANCE ORDER
Remove a guard of devices and check up resistance between the specified conclusions. Between conclusions IGN and GROUND resistance should be 110 Ohm on cars without a tachometre and 213 Ohm with a tachometre. Between conclusions UNIT and IGN resistance should be 25 Ohm on cars without a tachometre and 83 Ohm with a tachometre. Resistance between conclusions UNIT and GROUND 135 Ohm (without a tachometre) or 130 Ohm (with a tachometre).

CARS TROOPER/BIGHORN

PERFORMANCE ORDER
Check up resistance between conclusions of the index of fuel which should be 25 Ohm.