Isuzu Truper - Isuzu Trooper
1. The maintenance instruction
2. Maintenance service
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and a running gear
7. A suspension bracket and a steering
8. Brake system
9. A body
10. A body electric equipment
   10.1. Heating and air conditioning system
   10.2. The receiver
   10.3. The electric motor of a screen wiper of a windscreen, draught of a drive of brushes
   10.4. The electric motor of a screen wiper of back glass
   10.5. Devices and switches
      10.5.1. A guard of devices
      10.5.2. A speedometer
      10.5.3. The index of level of fuel
      10.5.4. The gauge of level of fuel
      10.5.5. The forward panel
         10.5.5.1. Average section of the forward panel
      10.5.6. The switch of a screen wiper of a windscreen
      10.5.7. The switch of a screen wiper of back glass
      10.5.8. The switch of headlights
      10.5.9. The switch of light of headlights
      10.5.10. The ignition switch
      10.5.11. A cable of a drive of a speedometer
      10.5.12. Light devices
      10.5.13. Devices of the light alarm system
      10.5.14. The list of the lamps applied in car Trooper/Bighorn
      10.5.15. The list of the lamps applied in car Rodeo
   10.6. Cruise-control
   10.7. The deblocking device
   10.8. Devices of protection against overloads
11. Diagnostics of malfunctions
12. Electroschemes





Isuzu Trooper>> Body electric equipment>> Devices and switches>> The forward panel

10.5.5. The forward panel

CARS AMIGO/MU/JAZZ

Removal


PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Remove the receiver and handles of management of a heater.
3. Remove the decorative panel of a guard of devices.
4. Remove a lateral ventilating nozzle, having hooked a screw-driver.
5. Remove a guard of devices and a defrosting nozzle.
6. Remove air lines and a heater.
7. Remove a steering wheel both a steering shaft and a column.
8. Remove the top cover of the panel and the forward panel.

Installation

PERFORMANCE ORDER
1. Establish the forward panel and the top cover of the panel.
2. Establish a column, a steering shaft and a steering wheel.
3. Establish air lines and a heater.
4. Establish a guard of devices and a nozzle of defrosting of lateral glass.
5. Establish a lateral ventilating nozzle.
6. Establish the decorative panel of a guard of devices.
7. Establish the receiver and handles of management of a heater.
8. Connect the battery to weight.

CARS TROOPER/BIGHORN

1 – a tray of a combination of devices (it is established on a part of cars)
1а – a combination of devices
2 – a decorative cover of a guard of devices
3 – details of a guard of devices
4 – перчаточный a box
5 – the receiver
6 – a lattice, a ventilating nozzle and a nozzle of defrosting of lateral glass
7 – bolts
8 – the forward panel

Removal

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Remove a tray and a combination of devices (it is established on a part of cars).
3. Remove the decorative panel and a guard of devices.
4. Remove the receiver and перчаточный a box (if it is provided).
5. Remove a lattice of a lateral nozzle обдува and defrosting.
6. Turn away 10 screws and remove the forward panel.

Installation

PERFORMANCE ORDER
1. Establish the forward panel, wrap screws.
2. Establish a lattice of a lateral nozzle обдува and defrosting.
3. Establish the receiver and перчаточный a box (if it is provided).
4. Establish a guard of devices and the decorative panel.
5. Establish a combination of devices and a tray.
6. Connect the battery to weight.

CARS RODEO/PASSPORT

1 – a steering wheel and details of a decorative casing
2 – lattices and decorative overlays
3 – a cover of a guard of devices
4 – a guard of devices
5 – a decorative casing of a guard of devices
6 – the button of a drive of the lock of a cowl
7 – the bottom cover
8 – the block of safety locks
9 – a lateral guard
10 – the processor block
11 – the receiver panel
12 – intensifying section
13 – a lattice dynamics
14 – перчаточный a box
15 – overlays of buttons
16 – фальшпанель
17 – the control panel
18 – an illumination regulator
19 – the forward panel

Removal

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Remove a steering wheel with decorative overlays.
3. Hook a screw-driver and remove decorative lattices and фальшпанель.
4. Turn away a nut of fastening of the forward panel.
5. Remove a guard of devices.
6. Remove a decorative casing of a guard of devices, disconnect a cable of a drive of the lock of a cowl.
7. Remove the bottom cover of a wheel and the block of safety locks.
8. Remove a decorative overlay and processor block ECM.
9. Remove average section of the forward panel and the bottom intensifying section.
10. Remove decorative lattices and dynamics.
11. Remove перчаточный a box, handles of management of a heater and the conditioner.
12. Remove the panel of control levers, disconnect cables.

13. Remove a regulator of illumination and a switch overlay.

14. Remove the forward panel, if necessary disconnect sockets.

Installation

PERFORMANCE ORDER
1. Attach sockets, establish the forward panel.
2. Establish a regulator of illumination and a switch overlay.
3. Establish the panel of control levers, attach cables.
4. Establish перчаточный a box, handles of management of a heater and the conditioner.
5. Establish dynamics and decorative lattices.
6. Establish average section of the forward panel and the bottom intensifying section.
7. Establish a decorative overlay and processor block ECM.
8. Establish the bottom decorative cover of a wheel and the block of safety locks.
9. Establish a decorative cover of a guard of devices, attach a cable of a drive of the lock of a cowl.
10. Establish a guard of devices.
11. Fix the forward panel nuts.
12. Establish on the forward panel decorative lattices and фальшпанель.
13. Establish a steering wheel and decorative overlays.
14. Connect the battery to weight.