Isuzu Trooper>> Body electric equipment>> The deblocking device

10.7. The deblocking device Adjustment

1. Press a brake pedal. If the pedal completely comes back in a starting position measure height of a pedal from a body floor. Release bolts of fastening of the switch of a signal of braking and a counternut of a pusher of the switch. Adjust pusher position so that the height of a pedal of a brake from a body floor was equal 154 mm.
2. Adjust position of an end face of the switch so that at a reset the end face slightly rested against the rubber terminator on the lever of a pedal of a brake. Cautiously turn the switch until the pusher free wheeling will not disappear.