Isuzu Truper - Isuzu Trooper
1. The maintenance instruction
2. Maintenance service
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and a running gear
7. A suspension bracket and a steering
8. Brake system
9. A body
10. A body electric equipment
11. Diagnostics of malfunctions
   11.1. The basic malfunctions of coupling
   11.2. The basic malfunctions of a manual transmission
   11.3. The basic malfunctions карданного a shaft
   11.4. The basic malfunctions of a steering and a suspension bracket
   11.5. The basic malfunctions of the steering mechanism
   11.6. The basic malfunctions of the steering mechanism with the hydraulic booster
   11.7. The basic malfunctions of brakes
   11.8. Characteristic malfunctions of the engine and ways of elimination
   11.9. Characteristic malfunctions in system of cooling of the engine
   11.10. Characteristic malfunctions of a belt of a drive with the goffered profile
   11.11. Characteristic malfunctions of the power supply system (carburettor engines)
   11.12. Characteristic malfunctions of signals of turn and emergency юё=рэютъш 11_13.htm
12. Electroschemes





Isuzu Trooper>> Diagnostics of malfunctions>> Characteristic malfunctions of a belt of a drive with the goffered profile

11.10. Characteristic malfunctions of a belt of a drive with the goffered profile
THE GENERAL DATA

THE REASON
WAY OF ELIMINATION
Отслоение a textile cover of a belt from a basis (formation of cracks and ruptures on an external surface of a belt)
The height of flutes of a pulley is less than minimum Replace the pulleys which are not meeting requirements of specifications.
Задевание an external surface of a belt for a motionless subject Eliminate задевание.
The overheat causing ageing of a belt Replace a belt.
Rupture of a fabric cover Replace a belt.
At engine work unpleasant sounds high (peep or squeal) or low tone are listened
Проскальзывание a belt Adjust a tension.
Deterioration of bearings Establish the reason and eliminate.
Belt warp (displacement of a plane of pulleys) Combine planes of pulleys.
Discrepancy of a belt and pulley Establish a belt of recommended type.
Vibrations of conducted details Define faulty details and repair.
The vibrations caused by a resonance Adjust a tension or replace a belt.
Отслоение from a belt of one or several paths

Hit in flutes of pulleys of foreign particles

Clean pulleys.
Infringement of installation of a belt

Replace a belt.

Loading on a belt exceeds the admissible Adjust a tension.
Insufficient durability of a belt Replace a belt.
Deterioration of paths of a belt (paths rest against pulley flutes)
Displacement of a plane of pulleys

Combine pulleys.

Discrepancy of a profile of a belt and flutes of pulleys Replace a belt.
Abrasive deterioration Replace a belt.
Corrosion of pulleys Remove corrosion.
Sharp edges of a pulley (or jags on edges) Replace a belt.
Rubber ageing Replace a belt.
Longitudinal cracks (between paths)
Соскакивание paths of a belt from pulley flutes Replace a belt.
Rupture of a material of a belt in a place of a binding layer edges of flutes Replace a belt.
Проскальзывание a belt
Insufficient tension Adjust a tension.
Influence of the substances reducing a friction (a wipe of a belt dirty rags, hit of oil and охлаждающе liquids) Replace a belt and clear pulleys.
Destruction of bearings of conducted details Replace conducted bearings.
Brightness of a belt and hardening from an overheat and overloads Replace a belt.
Non-uniform deterioration of a belt (the belt descends from flutes, making axial movement)
Insufficient tension Adjust a tension.
The sizes of a pulley does not correspond to the standard Replace pulleys.
Hit in flutes of a pulley of foreign particles Clear a pulley.
Excessive speed of a belt Avoid intensive dispersals.
Displacement of a plane of pulleys Combine pulleys.
Discrepancy of a profile of flutes of a pulley and belt Establish a belt of recommended type.
Deformation of a skeleton of a belt Replace a belt.
Belt breakage (before installation of a new belt find the reason and eliminate)
Excessive tension Replace and adjust according to the instruction.
Damage of a material of a belt in the course of installation Replace a belt.
Проскальзывание a belt Replace a belt.
Strong displacement of planes of pulleys Combine pulleys in one plane.
Destruction of an arm, pulley or bearings Replace a belt and the failed details.
Destruction of edges of a belt (deleting of a cover of a belt on edges, or отслоение a material from a belt basis)
The belt tension exceeds norm Adjust a tension.
Displacement of planes of pulleys Combine pulleys in one plane.
Задевание belt edges for a motionless subject Eliminate задевание.
Non-uniformity of flutes of pulleys Replace a pulley.
The pulley design does not correspond to the standard Replace a pulley.
Insufficient durability of a belt Replace a belt.
Irregular cracks on combs of paths
Diameters of a pulley there is less than standard Replace a pulley.
The overheat of a belt which was at the bottom of hardening Establish the reason of an overheat and eliminate.
The thickness of a belt exceeds the standard Replace a belt.
The belt tension exceeds norm Adjust a tension.