Isuzu Truper - Isuzu Trooper
1. The maintenance instruction
2. Maintenance service
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and a running gear
7. A suspension bracket and a steering
8. Brake system
9. A body
10. A body electric equipment
11. Diagnostics of malfunctions
   11.1. The basic malfunctions of coupling
   11.2. The basic malfunctions of a manual transmission
   11.3. The basic malfunctions карданного a shaft
   11.4. The basic malfunctions of a steering and a suspension bracket
   11.5. The basic malfunctions of the steering mechanism
   11.6. The basic malfunctions of the steering mechanism with the hydraulic booster
   11.7. The basic malfunctions of brakes
   11.8. Characteristic malfunctions of the engine and ways of elimination
   11.9. Characteristic malfunctions in system of cooling of the engine
   11.10. Characteristic malfunctions of a belt of a drive with the goffered profile
   11.11. Characteristic malfunctions of the power supply system (carburettor engines)
   11.12. Characteristic malfunctions of signals of turn and emergency юё=рэютъш 11_13.htm
12. Electroschemes





Isuzu Trooper>> Diagnostics of malfunctions>> Characteristic malfunctions of signals of turn and emergency юё=рэютъш 11_13.htm

11.12. Characteristic malfunctions of signals of turn and an emergency stop
THE GENERAL DATA

As a rule, malfunction of indexes of turn is eliminated by replacement of the fused lamps. Sometimes a cause of a failure is malfunction of the switch on a steering column. For elimination of such malfunction it is necessary to address in a workshop.

MALFUNCTION
WAY OF ELIMINATION
All lamps of indexes of turn are shone, but the blinking is absent Replace the breaker.
All lamps of indexes of turn do not burn Check up the safety lock which has fused a safety lock replace. Check up replacement of lamps on obviously serviceable. Check up presence of breakages, short circuits and bad contact to weight.
Breakers on the one hand do not work Check up lamps. Check up connection with weight in both indexes.
One of indexes does not work Check up and replace a lamp. Check up corrosion of a cartridge of a lamp, smooth out contacts. Check up contact of a cartridge to weight.
Blinking with the raised or low frequency Check up a lamp of the faulty index, capacity of a lamp should correspond to the recommended. If a blinking rare instead of a standard lamp the lamp with smaller capacity and on the contrary is established. Check up a condition of a cartridge of a lamp, remove corrosion.
Control lamps of indexes of turn do not blink Check up serviceability of indexes. Check up serviceability of control lamps on the panel of devices. Check up the block of interruption by replacement on obviously serviceable.
One of control lamps does not burn If 1 control index check up is provided, whether headlights and lanterns on the party which the faulty control signal concerns burn. As a rule, a cause of a failure of a control lamp is wrong installation многонитевых lamps in those lanterns in which the braking signal is united with dimensional light and the turn index. If 2 control indexes check up lamps on the party which the faulty control signal concerns are provided, check up a control lamp and check up the block of interruption by replacement on obviously serviceable.