Isuzu Truper - Isuzu Trooper
1. The maintenance instruction
2. Maintenance service
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and a running gear
7. A suspension bracket and a steering
8. Brake system
9. A body
10. A body electric equipment
11. Diagnostics of malfunctions
   11.1. The basic malfunctions of coupling
   11.2. The basic malfunctions of a manual transmission
   11.3. The basic malfunctions карданного a shaft
   11.4. The basic malfunctions of a steering and a suspension bracket
   11.5. The basic malfunctions of the steering mechanism
   11.6. The basic malfunctions of the steering mechanism with the hydraulic booster
   11.7. The basic malfunctions of brakes
   11.8. Characteristic malfunctions of the engine and ways of elimination
   11.9. Characteristic malfunctions in system of cooling of the engine
   11.10. Characteristic malfunctions of a belt of a drive with the goffered profile
   11.11. Characteristic malfunctions of the power supply system (carburettor engines)
   11.12. Characteristic malfunctions of signals of turn and emergency юё=рэютъш 11_13.htm
12. Electroschemes





Isuzu Trooper>> Diagnostics of malfunctions>> The basic malfunctions of a manual transmission

11.2. The basic malfunctions of a manual transmission
THE GENERAL DATA

THE REASON
WAY OF ELIMINATION
The complicated gear change
Wrong adjustment of coupling To adjust.
Jamming of draught or drive cable To grease or find the reason and to eliminate.
Jamming of a rod of a plug of a gear change Check up fastening of the spherical hinge of the lever, an inhaling of bolts of a cover of the mechanism of management of a check point, deterioration of rods and apertures of rods in картере a check point, deformation of epiploons, correctness of installation of back section картера. If necessary repair.
Jamming of details of the internal device of a check point: plugs, ползунов or synchronizers To disassemble, check up a condition of details. The worn out or damaged details to replace.
Несцентрирован картер couplings in a back part картера couplings
Mark of the filled in oil does not correspond to the recommended To replace oil.
Deterioration of blocking rings of synchronizers and conic surfaces of conducted gear wheels To check up a backlash between a gear wreath of a conducted gear wheel and a blocking ring of the synchronizer. The backlash should be not less than 0,77 mm. If the backlash corresponds to norm it is necessary to check up deterioration of conic surfaces of a blocking ring and a conducted gear wheel.
Gnash at a gear change
Wrong adjustment of coupling To adjust.
Jamming of draught or cable of a drive of coupling To find the reason of jamming and to eliminate, grease rubbing places.
Несцентрирован картер couplings To check up соосность on an aperture in a back part картера couplings.
Low level of oil or mark of the filled in oil does not correspond to the recommended

To replace oil. To check up presence of a leak of oil (if low level is marked). To eliminate leaks.

Deterioration or damage of details of a gear change or synchronizers To disassemble and check up a condition of details. To replace the worn out details.
The raised noise from outside transmissions
Low level of oil or mark of the filled in oil does not correspond to the recommended To replace oil. To check up presence of a leak of oil (if low level is marked). To eliminate leaks.
Easing of an inhaling of bolts of fastening картера couplings or картера transmissions To check up an inhaling, to tighten bolts динамометрическим a key.
Hit in картер a check point of foreign particles (a dirt, metal sawdust, a shaving, etc.) To merge oil, to wash out картер and to fill in fresh oil.
Deterioration or damage of details of a gear change, gear wheels, details of fastening of bearings To remove a check point, to disassemble and check up a condition of details. To replace the worn out and damaged details.
Несцентрирован картер couplings To check up соосность on an aperture in a back part картера couplings.
Spontaneous deenergizing of transfer
Несцентрирован картер couplings To check up соосность on an aperture in a back part картера couplings.
Easing of fastening of the lever of a gear change To check up deterioration of a plug of the lever, to tighten ослабшие connections.
Deterioration of the nylon loose leaf of a side scene or easing of a nut of a side scene To remove the gear change lever, to check up deterioration of the nylon loose leaf or easing of an inhaling of a nut. To repair or replace.
Deterioration or damage of a primary shaft of a check point or roller bearings To replace a primary shaft of a check point or roller bearings.
Deterioration or damage of the mechanism of a gear change: plugs, ползунов, rods, муфты, clamps, springs, deterioration or cover damage To remove a check point, to remove the top cover and to check up a condition of details in a cover картера a check point. To replace the worn out and damaged details.
Deterioration or damage of teeths of gear wheels, the synchronizers, raised axial люфт a shaft of a check point owing to deterioration of persistent washers or conducted gear wheels of a secondary shaft of a check point To remove a check point, to disassemble and check up a condition of details. To replace the worn out and damaged details.
Deterioration of the plug of the directing bearing

To replace the plug.

One of transfers does not join
Deterioration or damage of the mechanism of a gear change: plugs, ползунов, rods To remove a check point, to remove the top cover and to check up a condition of details in a cover картера a check point. To replace the worn out and damaged details.
Deterioration of a ball of a clamp, breakage of a spring of a clamp or easing of a cover of clamps To tighten cover bolts, or to replace the worn out details.
Deterioration or damage of the lever of a gear change To replace the lever.
One of transfers is not switched off
Deterioration or damage of rods (or a rod), plug deformation, screw easing ползуна, loss or deterioration of a spring of an average clamp To check up a condition and to replace the worn out details.
Breakage of teeths of gear wheels of an intermediate shaft, primary shaft, or shaft of an intermediate gear wheel of a backing To check up a condition and to replace the worn out details.
Deterioration or damage of the lever of a gear change, wrong assemblage or breakage of the mechanism of a gear change, deterioration or damage of teeths of gear wheels, synchronizers and details of their fixing To disassemble a check point, to replace the worn out details and correctly to collect.