Isuzu Truper - Isuzu Trooper
1. The maintenance instruction
2. Maintenance service
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and a running gear
7. A suspension bracket and a steering
8. Brake system
9. A body
10. A body electric equipment
11. Diagnostics of malfunctions
   11.1. The basic malfunctions of coupling
   11.2. The basic malfunctions of a manual transmission
   11.3. The basic malfunctions карданного a shaft
   11.4. The basic malfunctions of a steering and a suspension bracket
   11.5. The basic malfunctions of the steering mechanism
   11.6. The basic malfunctions of the steering mechanism with the hydraulic booster
   11.7. The basic malfunctions of brakes
   11.8. Characteristic malfunctions of the engine and ways of elimination
   11.9. Characteristic malfunctions in system of cooling of the engine
   11.10. Characteristic malfunctions of a belt of a drive with the goffered profile
   11.11. Characteristic malfunctions of the power supply system (carburettor engines)
   11.12. Characteristic malfunctions of signals of turn and emergency юё=рэютъш 11_13.htm
12. Electroschemes





Isuzu Trooper>> Diagnostics of malfunctions>> The basic malfunctions of a steering and suspension bracket

11.4. The basic malfunctions of a steering and a suspension bracket
THE GENERAL DATA

THE REASON
WAY OF ELIMINATION
Hard rotation of a steering wheel
Low or unequal pressure in tyres
To restore pressure.
Easing of a belt of a drive of the pump of the hydraulic booster
To adjust a tension.
Low level of a liquid or liquid mark in a hydrodrive does not correspond to the recommended
To add a liquid or to replace.
Infringement of corners of installation of wheels
To check up and adjust corners of installation of wheels.
The hydraulic booster pump is faulty
To check up the pump.
Curvature or absence of greasing in details of a forward suspension bracket
To grease and replace the damaged details.
Raised люфт a steering wheel
Infringement of adjustment of bearings of forward wheels
To adjust.
Deterioration of tips of steering draughts
To replace the worn out details.
Shock-absorbers are faulty
To replace shock-absorbers.
Deterioration of spherical hinges of levers of a suspension bracket
To replace spherical hinges.
The car withdraws aside
Pressure in tyres differs from norm
To restore pressure.
Infringement of corners of installation of wheels
To check up and adjust corners of installation of wheels.
Infringement of adjustment of bearings of forward wheels
To adjust.
Curvature of details of a forward suspension bracket
To replace the damaged details.
Shock-absorbers are faulty
To replace shock-absorbers.
Vibrations of forward wheels which are felt on a wheel
Pressure in tyres does not correspond to the normal
To restore pressure.
Infringement of balancing of wheels
Отбалансировать wheels.
Infringement of adjustment of bearings of forward wheels
To adjust.
Infringement of disorder and convergence of wheels
To check up and adjust all corners of installation of wheels.
Deformation of details of a forward suspension bracket
To replace the damaged details.
Non-uniform deterioration of tyres
Pressure in tyres differs from norm
To restore pressure.
Infringement of corners of installation of wheels
To check up and adjust corners of installation of wheels.
Infringement of balancing of wheels
Отбалансировать wheels.
The wheel is not locked
Spring breakage
To replace a spring.
The complicated turn of a key in the ignition lock
The lock cylinder is faulty
To replace the cylinder.
The contact part of the lock is faulty
To replace.
Breakage or deformation of a persistent spring рейки
To replace a spring.
Agnails on details of a drive of the lock (рейке, муфте, sector, the case)
To remove agnails.
The sector shaft is bent
To replace a shaft.
It is faulty запорный a lock core
To replace a core.
Rod deformation
To replace a rod.
Deformation of an arm of the lock of ignition
To correct or replace.
Groove deformation in запорном a core (an adjustable steering column)
To replace a core.
Key заедает in position "START"
Deformation of the platen of the lock
To straighten or replace.
Deformation of an arm of the lock of ignition
To correct or replace.
The key cannot be taken from position "off-lock"
To adjust the ignition lock.
The lock cylinder is faulty
To replace the cylinder.
The lock gets without cave-in of a lock ring
The cylinder is faulty
To replace.
Agnails in a flute of a lock ring in the case or on a lock ring
To remove agnails.
The big effort while translating a key from position "off" in position "off-lock" and on the contrary
Deformation запорного a core
To replace a core.
Agnails on a tail part of a shutter (an automatic column)
To remove agnails.
Draught of the lever of change of an inclination of a column is not adjusted
To adjust.
Noise of a steering column
Click while translating a key in position "off-lock" then the wheel will start to rotate
It is supposed (a clamp comes back in a starting position).
Easing of pulling together bolts
To tighten bolts.
In bearings there is no greasing
To grease bearings.
Breakage or deterioration of the bearing of the top shaft
To replace the bearing in gathering.
Breakage or deterioration of the bearing of the bottom shaft
To replace the bearing. To check up a shaft condition, at detection задиров to replace.
Infringement of correct position of a column
To expose a column.
Breakage муфты
To replace муфту.
Breakage of the bottom hinge
To repair the hinge or to replace. To correct муфту.
Leaky landing of a lock ring of a steering shaft
To replace a ring. To check up reliability of landing of a ring.
Easing of a casing of a column. It is found out at wheel rotation
To expose a casing and to tighten screws.
The complicated rotation of a steering shaft
Wrong position of a steering column
To expose a column.
Defect in bearings of the top or bottom shaft
To replace bearings.
Hard rotation карданного the hinge
To repair or replace.
Agnails on the plastic hinge sliding шлицевого connections (an adjustable column) To replace муфту sliding шлицевого connections.
Люфт a steering column
Easing of bolts of an arm of a steering column
To tighten bolts.
Breakage of welding of the nuts welded on the case of a shaft of a wheel
To replace the case.
Deformation of lock plates of an arm of the case of a steering column
To replace an arm.
Easing of bolts of fastening of an arm to the case of a steering shaft
To tighten bolts динамометрическим a key.
Easing blocking колодок in the case (in an adjustable steering column)
To replace колодки.
Easing of axes of hinges (in an adjustable steering column)
To replace axes of hinges and a support.
Easing of axes of hinges blocking колодок (in an adjustable steering column)
To replace axes of hinges and the case.
Easing of bolts of fastening of a support (in an adjustable steering column)
To tighten bolts.
Easing of fastening of the case (only for adjustable columns)
The raised backlash between axes and apertures in a support or the case
To replace axes and a support.
Easing of bolts of fastening of a support to the case
To tighten bolts.
Steering wheel easing in any position (only for adjustable columns)
The raised backlash between axes and blocking колодками
To replace колодки and axes.
The steering wheel is not locked at any inclination (only for adjustable columns)
Прихват колодок to an axis
To replace колодки and axes.
On flutes колодок there are teases or pollution of flutes
To clear or replace колодки.
Breakage or loss of elasticity of springs колодок
To replace springs.
Noise at change of an inclination of a steering column (only for adjustable columns)
Deterioration of the top buffer
To replace the buffer.
The raised friction of a spring in the case
To grease with graphite greasing.
The big effort at change of an inclination of a column (only for automatic and adjustable columns)
Infringement of position of a column
To expose a column.
Warp of the bottom bearing
To disassemble and expose the bearing.
Absence of greasing in an epiploon or the bottom bearing
To grease.
Abnormal work of the mechanism of change of an inclination of a column (only for automatic and adjustable columns)
Are cut off шлицы tubular connection
To replace tubular connection.
Неотрегулирована draught of the lever of change of an inclination of a column
To adjust.
Easing of the bottom lever
To replace tubular connection.