>> The maintenance instruction
>> Опорожнение a water separator
||Hold capacity (capacity 0,2) under the end of a vinyl hose at the final screw of a water separator.
Unscrew the final screw and about 10 times press the manual pump, will not flow out yet about 0,1 l of water.
Then again tighten the screw and some more time press the manual pump.
After engine start watch that from the final screw fuel has not acted.
Also check up, whether the alarm lamp has gone out.
If often it is necessary to empty a water separator, it is necessary, that the fuel tank has been dehydrated by the expert.