Isuzu Truper - Isuzu Trooper
1. The maintenance instruction
   1.1. Introduction
   1.2. The panel of devices
   1.3. The ignition lock
   1.4. The combined switch
   1.5. The emergency light alarm system
   1.6. Switches of the panel of devices
   1.7. Cruise-control
   1.8. Devices and control lamps
   1.9. Control levers
   1.10. Windows and стеклоподъемники
   1.11. Salon illumination
   1.12. An electric digital watch
   1.13. Controls heating and the fan or the conditioner
   1.14. Driving
   1.15. Release of air from fuel system
   1.16. Опорожнение a water separator
   1.17. Regular checks
   1.18. Service of the air filter
   1.19. Engine oil replacement
   1.20. The block of safety locks
   1.21. Technical characteristics
2. Maintenance service
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and a running gear
7. A suspension bracket and a steering
8. Brake system
9. A body
10. A body electric equipment
11. Diagnostics of malfunctions
12. Electroschemes

Isuzu Trooper>> The maintenance instruction>> Cruise-control

1.7. Cruise-control

Automatic cruise-control works, if the switch is in position "ON".

In position "OFF" the system does not work.

"SET" – press the button and at achievement of desirable speed release it.


"Accel" – acceleration.

For acceleration translate the switch in position "Resume-Accel".

At achievement of desirable speed release, the gained speed automatically remains.

Gradual acceleration: short switching (less than 1 second) on "Resume/Assel" and again to release (1 step), speed with each step increases on 1,6 km/hour.


"Coast" – накат.

Press the button while speed will not decrease to desirable parametre.

When desirable speed will be reached, the button release.

Gradual delay

Press (less than 1 сек) the button and again release (1 step), with each step speed decreases on 1,6 km/hour.


"Resume" – return.

Translate the lever in position "Resume/Accel", originally set speed comes back.