Isuzu Truper - Isuzu Trooper
1. The maintenance instruction
2. Maintenance service
   2.1. The data on car identification
   2.2. The general data of engines
   2.3. THAT of cars Trooper/Bighorn with the diesel engine
   2.4. Instructions on leaving
      2.4.1. The air filter
      2.4.2. The fuel filter (petrol engines)
      2.4.3. The fuel filter (diesel engines)
      2.4.4. Draining of the water which have collected in fuel system of the diesel engine
      2.4.5. Compulsory system of ventilation картера (PCV-system)
      2.4.6. A tank for catching of steams of gasoline
      2.4.7. Features of check of system of catching of steams
      2.4.8. The storage battery
      2.4.9. Drive belts
      2.4.10. Cooling system
      2.4.11. A central air
      2.4.12. A screen wiper
      2.4.13. Recommended marks of fuel and oil
      2.4.14. Care of a manual transmission or automatic transmission
      2.4.15. Check of level of oil or a liquid
      2.4.16. Oil replacement
      2.4.17. Carter of a distributing box
      2.4.18. A reducer of the back bridge Check of level of oil in a reducer of the back bridge Oil replacement in a reducer of the back bridge
      2.4.19. A cooling liquid
      2.4.20. The main brake cylinder
      2.4.21. The main cylinder of a hydrodrive of coupling
      2.4.22. A nutritious tank of the hydraulic booster of a wheel
      2.4.23. A reducer of the steering mechanism
      2.4.24. Running gear greasing
      2.4.25. Body greasing
      2.4.26. Greasing of the mechanism of a manual brake
      2.4.27. Greasing of draught of a drive throttle заслонки
      2.4.28. Greasing of the lever of a gear change
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and a running gear
7. A suspension bracket and a steering
8. Brake system
9. A body
10. A body electric equipment
11. Diagnostics of malfunctions
12. Electroschemes

Isuzu Trooper>> Maintenance service>> Instructions on leaving>> Reducer of the back bridge>> Oil replacement in a reducer of the back bridge Oil replacement in a reducer of the back bridge

Stoppers of a control (refuelling) and drain aperture in the case of a reducer of the back bridge

1 – a stopper of a control aperture

2 – a stopper of a drain aperture

1. Lift the car completely and establish on 4 supports. Substitute the pallet under the reducer case.
2. If the drain stopper turn out it if is not present turn away bolts of fastening of a cover of the case of a reducer is provided. Hook a cover and merge oil in the pallet. Oil is better for sucking away the pump (if is available).
3. Wipe differential and examine. Clear a cover and привалочную a case surface, put hermetic.
4. Establish a new lining, a cover, turn and tighten bolts. Fill in oil (preliminary having turned a stopper of a drain aperture – at presence) through a control aperture.
5. Finish level of oil to a bottom edge of an aperture and wrap a stopper. Lower the car.