Isuzu Truper - Isuzu Trooper
1. The maintenance instruction
2. Maintenance service
   2.1. The data on car identification
   2.2. The general data of engines
   2.3. THAT of cars Trooper/Bighorn with the diesel engine
   2.4. Instructions on leaving
      2.4.1. The air filter
      2.4.2. The fuel filter (petrol engines)
      2.4.3. The fuel filter (diesel engines)
      2.4.4. Draining of the water which have collected in fuel system of the diesel engine
      2.4.5. Compulsory system of ventilation картера (PCV-system)
      2.4.6. A tank for catching of steams of gasoline
      2.4.7. Features of check of system of catching of steams
      2.4.8. The storage battery
      2.4.9. Drive belts
      2.4.10. Cooling system
      2.4.11. A central air
      2.4.12. A screen wiper
      2.4.13. Recommended marks of fuel and oil
      2.4.14. Care of a manual transmission or automatic transmission
      2.4.15. Check of level of oil or a liquid
      2.4.16. Oil replacement
      2.4.17. Carter of a distributing box
      2.4.18. A reducer of the back bridge
      2.4.19. A cooling liquid
      2.4.20. The main brake cylinder
      2.4.21. The main cylinder of a hydrodrive of coupling
      2.4.22. A nutritious tank of the hydraulic booster of a wheel
      2.4.23. A reducer of the steering mechanism
      2.4.24. Running gear greasing
      2.4.25. Body greasing
      2.4.26. Greasing of the mechanism of a manual brake
      2.4.27. Greasing of draught of a drive throttle заслонки
      2.4.28. Greasing of the lever of a gear change
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and a running gear
7. A suspension bracket and a steering
8. Brake system
9. A body
10. A body electric equipment
11. Diagnostics of malfunctions
12. Electroschemes





Isuzu Trooper>> Maintenance service>> Instructions on leaving>> Features of check of system of catching of steams

2.4.7. Features of check of system of catching of steams
THE GENERAL DATA

6-CYLINDER ENGINES V6

System of catching of steams of gasoline on 4-cylinder petrol engines

1 – the air filter
2 – the carburettor
3 – a tank
4 – the air filter
5 – ball and поплавковый valves
6 – a fuel tank
7 – редукционный the valve
8 – gasoline
9 – gasoline steams
10 – air
11 – the control valve

System of catching of steams of gasoline on 6-cylinder petrol engines

1 – the chamber throttle заслонки (TBI)
2 – a tank with an absorber
3 – a fuel tank
4 – a restrictive nozzle
5 – a tube
6 – a stopper of a mouth of a fuel tank
7 – a hose
8 – the distributor of a stream with a thermodrive

THE VENTILATING VALVE

PERFORMANCE ORDER
1. Attach a hose piece to the bottom tube of the valve and blow. Air should not pass through the valve.
2. Create depression of 15 mm Hg, having connected the manual vacuum pump to the top (control) tube of the valve. The diaphragm should keep depression during not less 20 сек, otherwise a tank replace.

THE CONTROL VALVE OF THE FUEL TANK

PERFORMANCE ORDER
1. Create depression of 15 mm Hg, having connected the manual vacuum pump to a control tube. The diaphragm should keep depression during not less 20 сек, otherwise the diaphragm has lost tightness and the valve is subject to replacement.
2. Create depression on a control tube. Attach a hose piece to a tube of the valve of a fuel tank and blow. If air does not pass, the valve replace.