Isuzu Truper - Isuzu Trooper
1. The maintenance instruction
2. Maintenance service
3. Engines
   3.1. Specifications of the engine and adjusting works
      3.1.1. Spark plugs
      3.1.2. Ignition installation
      3.1.3. Installation of the moment of injection of fuel
      3.1.4. Electronic ignition
      3.1.5. Adjustment of backlashes of valves
      3.1.6. Adjustment of turns of idling on carburettor engines
      3.1.7. Adjustment of turns of idling on engines with injection system
      3.1.8. Adjustment of turns of idling on diesel engines
   3.2. An electric equipment and major repairs of engines
   3.3. The diesel engine of 2,8 litres
4. System of decrease in toxicity
5. Fuel system
6. Transmission and a running gear
7. A suspension bracket and a steering
8. Brake system
9. A body
10. A body electric equipment
11. Diagnostics of malfunctions
12. Electroschemes





Isuzu Trooper>> Engines

3. Engines

3.1. Specifications of the engine and adjusting works
THE GENERAL DATA

Adjusting data for petrol engines

Year
Model
The name of a series of the engine
Spark plugs
Type
Backlash, mm
1984-1995
Trooper II/Amigo
4ZD1
BPR-6ES11 NGK
1,0
1984-1995
Trooper II/Amigo/Passport
4ZE1
BPR-6ES11 NGK
1,0
1989-1991
Trooper II
V6 2,8 l
R43TSK
1,1
1991-1995
Rodeo
V6 3,1 l
R43TSK
1,1

Corner of an advancing of ignition, hailstones
Pressure of a compression, атм
Idling turns, rpm
Backlashes in valves, mm
The inlet
The final
21
10,7
900 (fur. A check point) 800 (a check point bus)
0,15
0,25
13
10,7
850 – 950
0,15
0,25
9,5
800
0,15
0,25
9,5
900
0,15
0,25

Adjusting data for diesel engines (without the diesel engine of 2,8 litres *)

Year
Model
Backlashes in valves, mm
Corner of opening of the inlet valve,
The inlet
The final
1981-1988
C223
0,4
0,4
16
1986-1988
C223T
0,4
0,4
16

Installation of injection of fuel,
Pressure of injection upon an atomizer, атм
Idling turns, rpm
Pressure of a compression, атм
The new
Second-hand
15
94
94
750
441
10
120
120
750
441

* Data at the diesel engine of 2,8 litres look in subsection 3.3.2.
The prevention

Full adjustment of the engine should be carried out through each 50000 km of run or 24 months, depending on that will come before. If the engine worked under trying conditions (towing, long work idling, sharp dispersals and braking) or if the complicated start-up the specified data should be reduced twice is marked. If the adjusting data resulted in a management and on the tablet under a cowl, differs, it is necessary to be guided by the data on the tablet.


 

секс москва