Isuzu Truper - Isuzu Trooper
1. The maintenance instruction
2. Maintenance service
3. Engines
   3.1. Specifications of the engine and adjusting works
   3.2. An electric equipment and major repairs of engines
      3.2.1. An electric equipment of engines
         3.2.1.1. The ignition coil
            3.2.1.1.1. Check
            3.2.1.1.2. Removal and installation
         3.2.1.2. The ignition block
         3.2.1.3. The induction gauge of ignition for engines V6
         3.2.1.4. The ignition distributor
         3.2.1.5. System of a charge of the battery
         3.2.1.6. System of start-up of the engine
      3.2.2. Major repairs of engines
   3.3. The diesel engine of 2,8 litres
4. System of decrease in toxicity
5. Fuel system
6. Transmission and a running gear
7. A suspension bracket and a steering
8. Brake system
9. A body
10. A body electric equipment
11. Diagnostics of malfunctions
12. Electroschemes





Isuzu Trooper>> Engines>> Electric equipment and major repairs of engines>> Electric equipment of engines>> The ignition coil>> Removal and installation

3.2.1.1.2. Removal and installation
THE GENERAL DATA

The coil of ignition of cars Trooper, Trooper II and Amigo/Jazz c engines 4ZD1 and 4ZE1

1 – fastening bolts
2 – positive and negative conclusions
3 – a high-voltage wire

Removal

PERFORMANCE ORDER
Cars Trooper, Trooper II and Amigo/Jazz c engines 4ZD1 and 4ZE1
1. Disconnect the battery from weight, disconnect a conducting socket on the coil.
2. Turn away two screws and remove the coil in gathering.
3. Establish the coil of ignition and wrap screws.
4. Connect the battery to weight, attach a socket.
Cars Trooper, Trooper II and Amigo c engines V6
5. Disconnect the battery from weight.
6. Disconnect conducting sockets.
7. Turn away bolts of fastening and remove the coil.

Installation

PERFORMANCE ORDER
1. Establish the coil, tighten bolts of fastening with the moment 27 Н.м.
2. Connect all sockets and connect the battery to weight, check up ignition work.