Isuzu Truper - Isuzu Trooper
1. The maintenance instruction
2. Maintenance service
3. Engines
   3.1. Specifications of the engine and adjusting works
   3.2. An electric equipment and major repairs of engines
      3.2.1. An electric equipment of engines
         3.2.1.1. The ignition coil
         3.2.1.2. The ignition block
            3.2.1.2.1. Check without removal
            3.2.1.2.2. Removal and installation
         3.2.1.3. The induction gauge of ignition for engines V6
         3.2.1.4. The ignition distributor
         3.2.1.5. System of a charge of the battery
         3.2.1.6. System of start-up of the engine
      3.2.2. Major repairs of engines
   3.3. The diesel engine of 2,8 litres
4. System of decrease in toxicity
5. Fuel system
6. Transmission and a running gear
7. A suspension bracket and a steering
8. Brake system
9. A body
10. A body electric equipment
11. Diagnostics of malfunctions
12. Electroschemes





Isuzu Trooper>> Engines>> Electric equipment and major repairs of engines>> Electric equipment of engines>> The ignition block>> Removal and installation

3.2.1.2.2. Removal and installation
THE GENERAL DATA

ENGINES 4ZD1 AND 4ZE1

The ignition block on engines 4ZD1 and 4ZE1

1 – the integrated block of ignition

2 – статор and a magnet

3 – the block of ignition and a breaker plate

4 – a rotating pole

5 – a vacuum regulator

6 – a distributor cover

Combination of a plate of the breaker with the case

The place of combination of a plate of the breaker with the case is shown by an arrow.

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Uncover the distributor, бегунок and a sealant.
3. Remove the chamber of a vacuum regulator, unhook draught of a regulator.
4. Disconnect conducting sockets.
5. Remove rotating pole. Hook a pole cover, having hooked a pole from below, remove it.
6. Remove the ignition block in gathering with a plate. Remove статор, a magnet and the ignition block.