Isuzu Truper - Isuzu Trooper
1. The maintenance instruction
2. Maintenance service
3. Engines
   3.1. Specifications of the engine and adjusting works
   3.2. An electric equipment and major repairs of engines
      3.2.1. An electric equipment of engines
         3.2.1.1. The ignition coil
         3.2.1.2. The ignition block
         3.2.1.3. The induction gauge of ignition for engines V6
         3.2.1.4. The ignition distributor
         3.2.1.5. System of a charge of the battery
         3.2.1.6. System of start-up of the engine
      3.2.2. Major repairs of engines
   3.3. The diesel engine of 2,8 litres
4. System of decrease in toxicity
5. Fuel system
6. Transmission and a running gear
7. A suspension bracket and a steering
8. Brake system
9. A body
10. A body electric equipment
11. Diagnostics of malfunctions
12. Electroschemes





Isuzu Trooper>> Engines>> Electric equipment and major repairs of engines>> Electric equipment of engines>> The induction gauge of ignition for engines V6

3.2.1.3. The induction gauge of ignition for engines V6
THE GENERAL DATA

Check of resistance of a winding of the induction gauge of ignition on engines V6

Adjustment of a backlash of the induction gauge on engines of early models

Check

PERFORMANCE ORDER
1. Disconnect from the gauge conducting.
2. Switch an ohmmeter to an average range
3. Measure resistance of the gauge between both conclusions and the case which should be infinite.
4. Measure resistance of the gauge between conclusions which should be from 500 to 1000 Ohm. Bend wires on a socket and the gauge to be convinced of absence of internal breakage.
5. If resistance does not correspond to norm the gauge replace.

Backlash check on cars of early releases

PERFORMANCE ORDER
Measure щупом a backlash on a ledge of the induction gauge. Release two screws and move the ignition block so that the backlash has made 0,2–0,4 mm. Tighten screws and establish a cover.