Isuzu Truper - Isuzu Trooper
1. The maintenance instruction
2. Maintenance service
3. Engines
   3.1. Specifications of the engine and adjusting works
   3.2. An electric equipment and major repairs of engines
      3.2.1. An electric equipment of engines
         3.2.1.1. The ignition coil
         3.2.1.2. The ignition block
         3.2.1.3. The induction gauge of ignition for engines V6
         3.2.1.4. The ignition distributor
         3.2.1.5. System of a charge of the battery
            3.2.1.5.1. The generator
               3.2.1.5.1.1. Removal and installation
               3.2.1.5.1.2. Dismantling and check
            3.2.1.5.2. An external regulator of pressure
            3.2.1.5.3. The built in regulator of pressure
         3.2.1.6. System of start-up of the engine
      3.2.2. Major repairs of engines
   3.3. The diesel engine of 2,8 litres
4. System of decrease in toxicity
5. Fuel system
6. Transmission and a running gear
7. A suspension bracket and a steering
8. Brake system
9. A body
10. A body electric equipment
11. Diagnostics of malfunctions
12. Electroschemes





Isuzu Trooper>> Engines>> Electric equipment and major repairs of engines>> Electric equipment of engines>> System of a charge of the battery>> The generator>> Removal and installation

3.2.1.5.1.1. Removal and installation
THE GENERAL DATA

ENGINE V6 GENERATOR

Removal of the generator (engine V6)

1 – to a forward part of the engine
2 – the moment of an inhaling 25 Н.м.
3 – the moment of an inhaling 35 Н.м.
4 – the moment of an inhaling 25 Н.м.

Removal and installation

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Remove a cap and disconnect a cable from the battery in a back part of the generator.
3. Remove a drive belt.
4. Turn away a bolt of an arm of the air pump in a back part of the generator.
5. Turn away fastening bolts in a forward part of the generator and remove the generator from the car.
6. Establish the generator and tighten fastening bolts.
7. Put on a drive belt.
8. Tighten the bottom bolt of fastening with the moment 35 Н.м., the top bolt – with the moment 25 Н.м. And a bolt of an arm of the pump – with the moment 25 Н.м.

OTHER MODELS

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Disconnect generator conducting (preliminary having marked).
3. Turn away directing bolt in the bottom part of the generator. Remove a drive belt.
4. Turn away bolts of fastening of the generator and remove the generator.
5. Establish the generator.
6. Adjust a tension of a belt and tighten fastening bolts.
7. Attach generator sockets, connect the battery to weight.