Isuzu Truper - Isuzu Trooper
1. The maintenance instruction
2. Maintenance service
3. Engines
   3.1. Specifications of the engine and adjusting works
   3.2. An electric equipment and major repairs of engines
      3.2.1. An electric equipment of engines
         3.2.1.1. The ignition coil
         3.2.1.2. The ignition block
         3.2.1.3. The induction gauge of ignition for engines V6
         3.2.1.4. The ignition distributor
         3.2.1.5. System of a charge of the battery
         3.2.1.6. System of start-up of the engine
            3.2.1.6.1. The storage battery
            3.2.1.6.2. A starter
            3.2.1.6.3. The traction relay of a starter
            3.2.1.6.4. A starter without a reducer
            3.2.1.6.5. A starter with a reducer
      3.2.2. Major repairs of engines
   3.3. The diesel engine of 2,8 litres
4. System of decrease in toxicity
5. Fuel system
6. Transmission and a running gear
7. A suspension bracket and a steering
8. Brake system
9. A body
10. A body electric equipment
11. Diagnostics of malfunctions
12. Electroschemes





Isuzu Trooper>> Engines>> Electric equipment and major repairs of engines>> Electric equipment of engines>> System of start-up of the engine>> Starter

3.2.1.6.2. A starter
THE GENERAL DATA

4-CYLINDER ENGINES

Starter removal (4-cylinder engines)

1 – a conclusion In
2 – a conclusion With
3 – bolts and fastening nuts
4 – a starter

Removal and installation

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. If necessary disconnect and lift the receiver systems рециркуляции.
3. Turn away bolts of fastening of a starter to the engine and remove a starter.
4. Establish a starter.
5. Attach wires.
6. Attach a system tube рециркуляции.
7. Connect the battery to weight.

6-CYLINDER ENGINES

Starter removal (6-cylinder engines)

1 – a conclusion In
2 – conclusion L
3 – bolts and fastening nuts
4 – a starter

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Lift the car and establish on supports.
3. Disconnect from a starter conducting, preliminary having marked each of wires.
4. Turn away bolts of fastening of a starter to the engine.
5. Remove a starter for what displace it downwards and get from under the car.
6. Establish a starter and linings (if are provided).
7. Attach to a starter conducting.
8. Lower the car.
9. Connect the battery to weight.