Isuzu Truper - Isuzu Trooper
1. The maintenance instruction
2. Maintenance service
3. Engines
   3.1. Specifications of the engine and adjusting works
   3.2. An electric equipment and major repairs of engines
      3.2.1. An electric equipment of engines
         3.2.1.1. The ignition coil
         3.2.1.2. The ignition block
         3.2.1.3. The induction gauge of ignition for engines V6
         3.2.1.4. The ignition distributor
         3.2.1.5. System of a charge of the battery
         3.2.1.6. System of start-up of the engine
            3.2.1.6.1. The storage battery
            3.2.1.6.2. A starter
            3.2.1.6.3. The traction relay of a starter
            3.2.1.6.4. A starter without a reducer
            3.2.1.6.5. A starter with a reducer
      3.2.2. Major repairs of engines
   3.3. The diesel engine of 2,8 litres
4. System of decrease in toxicity
5. Fuel system
6. Transmission and a running gear
7. A suspension bracket and a steering
8. Brake system
9. A body
10. A body electric equipment
11. Diagnostics of malfunctions
12. Electroschemes





Isuzu Trooper>> Engines>> Electric equipment and major repairs of engines>> Electric equipment of engines>> System of start-up of the engine>> The traction relay of a starter

3.2.1.6.3. The traction relay of a starter

Replacement

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Remove a starter.
3. Disconnect from a starter a wire of the traction relay.
4. Turn away bolts of fastening and remove the traction relay. Get from the relay a torsion spring (if it is provided). On some starters it can be necessary for removal of the traction relay to turn on and get coupling bolts.
5. Establish the traction relay and adjusting linings.
6. Tighten bolts with the moment 20 Н.м.
7. Connect a wire of the traction relay to a starter.
8. Establish coupling bolts (if acted in film).
9. Establish a starter and linings (if are provided). Attach wires and a cable from the battery.
10. Check up starter work.