Isuzu Truper - Isuzu Trooper
1. The maintenance instruction
2. Maintenance service
3. Engines
   3.1. Specifications of the engine and adjusting works
   3.2. An electric equipment and major repairs of engines
      3.2.1. An electric equipment of engines
      3.2.2. Major repairs of engines
         3.2.2.1. Technical characteristics
         3.2.2.2. Instructions on service and engine repair
         3.2.2.3. Dismantle and installation of the power unit
         3.2.2.4. A cover of a head of cylinders
         3.2.2.5. Коромысла and platens коромысел
         3.2.2.6. The thermostat
         3.2.2.7. A soaking up collector
         3.2.2.8. A final collector
         3.2.2.9. Турбокомпрессор
         3.2.2.10. The conditioner
         3.2.2.11. A radiator
         3.2.2.12. The fan of system of cooling with a drive from the electric motor
         3.2.2.13. The pump of a cooling liquid
         3.2.2.14. A head of cylinders
         3.2.2.15. Valves and springs
         3.2.2.16. Pushers
         3.2.2.17. The oil pallet
         3.2.2.18. The oil pump
         3.2.2.19. An epiploon of a forward cover of a gear belt
         3.2.2.20. A chain of a drive of a camshaft and a drive asterisk
         3.2.2.21. A forward cover of a gear belt
         3.2.2.22. An epiploon of a cranked shaft
         3.2.2.23. A gear belt and натяжитель
         3.2.2.24. A gear belt and the tension mechanism
         3.2.2.25. A drive газораспределительного the mechanism petrol engines
         3.2.2.26. A drive газораспределительного the mechanism diesel engines
         3.2.2.27. A camshaft
         3.2.2.28. Camshaft bearings
         3.2.2.29. Pistons and rods
         3.2.2.30. Shatunnye bearings
         3.2.2.31. Assemblage of shatunno-piston group and installation on the engine
         3.2.2.32. Заглушки and a heater картера the engine
         3.2.2.33. A back epiploon of a cranked shaft
         3.2.2.34. A cranked shaft and radical bearings
         3.2.2.35. A flywheel and a gear wreath
   3.3. The diesel engine of 2,8 litres
4. System of decrease in toxicity
5. Fuel system
6. Transmission and a running gear
7. A suspension bracket and a steering
8. Brake system
9. A body
10. A body electric equipment
11. Diagnostics of malfunctions
12. Electroschemes





Isuzu Trooper>> Engines>> Electric equipment and major repairs of engines>> Major repairs of engines>> The pump of a cooling liquid

3.2.2.13. The pump of a cooling liquid

ENGINES 4ZD1

Removal

PERFORMANCE ORDER
1. Disconnect the battery from weight and merge cooling liquid.
2. Remove a belt of a drive and a pulley.
3. Remove the pump and a lining.

Installation

PERFORMANCE ORDER
1. Carefully remove the rests of old consolidation and establish a new lining. Establish the pump and tighten bolts of fastening with the moment 25 Н.м.
2. Establish a belt of a drive and a pulley.
3. Connect the battery to weight, fill in cooling liquid, start the engine and be convinced of absence of a leak.

ENGINES 4ZЕ1

Removal

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Remove the bottom casing (if it is provided) and merge cooling liquid.
3. Remove a belt of a drive from a pulley of the pump of a cooling liquid.
4. Remove from a branch pipe of the pump a hose (if such connection is provided by a design).
5. Remove from a pump nave крыльчатку the fan and a pulley.
6. Turn away bolts of fastening of the pump to the engine, remove the pump and a lining.
7. Clear and check up a condition привалочных pump and engine planes.

Installation

PERFORMANCE ORDER
1. Establish a new lining. Establish the pump and tighten bolts of fastening with the moment 33–52 Н.м.
2. Establish on a pump nave крыльчатку the fan and a pulley.
3. Attach a hose to the pump.
4. Establish a belt of a drive and adjust a tension.
5. Fill in in system of cooling a liquid.
6. Connect the battery to weight.
7. Start the engine, warm up to normal temperature and be convinced of absence of a leak.

ENGINES V6

Details of the pump of system of cooling of engine V6

1 – 7 bolts of fastening of the pump

2 – картер a cranked shaft of the engine

3 – a forward cover

4 – the pump

Removal

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Merge cooling liquid.
3. Remove racks of a casing and (or) a radiator.
4. Remove all belts of a drive.
5. Remove from the pump крыльчатку the fan and a pulley.
6. Remove the top and bottom arms of the generator. Remove the bottom arm of the pump of the hydraulic booster and take aside.
7. Disconnect from the pump the top hose of the generator and a heater hose.
8. Remove the pump of a cooling liquid.

Installation

PERFORMANCE ORDER
1. Clear a condensed surface of the pump.
2. Put on a new lining hermetic of type RTV.
3. Establish a lining, the pump and tighten bolts of fastening with the moment 20–34 Н.м.
4. Attach to the pump the top hose of the generator and a heater hose.
5. Establish the top and bottom arms of the generator. Establish the bottom arm of the pump of the hydraulic booster.
6. Establish on the pump крыльчатку the fan and a pulley.
7. Establish drive belts.
8. Establish racks of a casing and (or) a radiator.
9. Fill in cooling liquid.
10. Connect the battery to weight. Start the engine, warm up to normal temperature and be convinced of absence of a leak.