Isuzu Truper - Isuzu Trooper
1. The maintenance instruction
2. Maintenance service
3. Engines
   3.1. Specifications of the engine and adjusting works
   3.2. An electric equipment and major repairs of engines
      3.2.1. An electric equipment of engines
      3.2.2. Major repairs of engines
         3.2.2.1. Technical characteristics
         3.2.2.2. Instructions on service and engine repair
         3.2.2.3. Dismantle and installation of the power unit
         3.2.2.4. A cover of a head of cylinders
         3.2.2.5. Коромысла and platens коромысел
         3.2.2.6. The thermostat
         3.2.2.7. A soaking up collector
         3.2.2.8. A final collector
         3.2.2.9. Турбокомпрессор
         3.2.2.10. The conditioner
         3.2.2.11. A radiator
         3.2.2.12. The fan of system of cooling with a drive from the electric motor
         3.2.2.13. The pump of a cooling liquid
         3.2.2.14. A head of cylinders
         3.2.2.15. Valves and springs
            3.2.2.15.1. Check of springs
            3.2.2.15.2. Directing plugs of valves
            3.2.2.15.3. Saddles of valves
            3.2.2.15.4. Grinding in of valves
         3.2.2.16. Pushers
         3.2.2.17. The oil pallet
         3.2.2.18. The oil pump
         3.2.2.19. An epiploon of a forward cover of a gear belt
         3.2.2.20. A chain of a drive of a camshaft and a drive asterisk
         3.2.2.21. A forward cover of a gear belt
         3.2.2.22. An epiploon of a cranked shaft
         3.2.2.23. A gear belt and натяжитель
         3.2.2.24. A gear belt and the tension mechanism
         3.2.2.25. A drive газораспределительного the mechanism petrol engines
         3.2.2.26. A drive газораспределительного the mechanism diesel engines
         3.2.2.27. A camshaft
         3.2.2.28. Camshaft bearings
         3.2.2.29. Pistons and rods
         3.2.2.30. Shatunnye bearings
         3.2.2.31. Assemblage of shatunno-piston group and installation on the engine
         3.2.2.32. Заглушки and a heater картера the engine
         3.2.2.33. A back epiploon of a cranked shaft
         3.2.2.34. A cranked shaft and radical bearings
         3.2.2.35. A flywheel and a gear wreath
   3.3. The diesel engine of 2,8 litres
4. System of decrease in toxicity
5. Fuel system
6. Transmission and a running gear
7. A suspension bracket and a steering
8. Brake system
9. A body
10. A body electric equipment
11. Diagnostics of malfunctions
12. Electroschemes





Isuzu Trooper>> Engines>> Electric equipment and major repairs of engines>> Major repairs of engines>> Valves and springs

3.2.2.15. Valves and springs
THE GENERAL DATA

Removal of springs of valves

Compression of springs of valves

Deterioration of a core of the valve

1 – normal deterioration
2 – the picture of rotary deterioration is absent
3 – a picture of incomplete rotation

Installation маслосъемных caps on a valve core

1 – a plate

2 – a spring

3 – the valve

4 – маслосъемный a cap

Polishing of valves is carried out only in specialised workshops.

PERFORMANCE ORDER
1. Before removal put labels on heads of valves, having turned a head of cylinders.
2. Compress springs of valves, get crackers.
3. Release the adaptation and remove a spring and a spring plate.
4. Wash out a core of the valve from a deposit and resinous adjournment in solvent for varnishes.
5. Wash out directing plugs by means of wire ершика, moistened with solvent.
6. At detection of traces of considerable deterioration of a detail replace.