Isuzu Truper - Isuzu Trooper
1. The maintenance instruction
2. Maintenance service
3. Engines
   3.1. Specifications of the engine and adjusting works
   3.2. An electric equipment and major repairs of engines
      3.2.1. An electric equipment of engines
      3.2.2. Major repairs of engines
         3.2.2.1. Technical characteristics
         3.2.2.2. Instructions on service and engine repair
         3.2.2.3. Dismantle and installation of the power unit
         3.2.2.4. A cover of a head of cylinders
         3.2.2.5. Коромысла and platens коромысел
         3.2.2.6. The thermostat
         3.2.2.7. A soaking up collector
         3.2.2.8. A final collector
         3.2.2.9. Турбокомпрессор
         3.2.2.10. The conditioner
         3.2.2.11. A radiator
         3.2.2.12. The fan of system of cooling with a drive from the electric motor
         3.2.2.13. The pump of a cooling liquid
         3.2.2.14. A head of cylinders
         3.2.2.15. Valves and springs
         3.2.2.16. Pushers
         3.2.2.17. The oil pallet
         3.2.2.18. The oil pump
         3.2.2.19. An epiploon of a forward cover of a gear belt
         3.2.2.20. A chain of a drive of a camshaft and a drive asterisk
         3.2.2.21. A forward cover of a gear belt
         3.2.2.22. An epiploon of a cranked shaft
         3.2.2.23. A gear belt and натяжитель
         3.2.2.24. A gear belt and the tension mechanism
         3.2.2.25. A drive газораспределительного the mechanism petrol engines
         3.2.2.26. A drive газораспределительного the mechanism diesel engines
         3.2.2.27. A camshaft
         3.2.2.28. Camshaft bearings
         3.2.2.29. Pistons and rods
         3.2.2.30. Shatunnye bearings
         3.2.2.31. Assemblage of shatunno-piston group and installation on the engine
         3.2.2.32. Заглушки and a heater картера the engine
         3.2.2.33. A back epiploon of a cranked shaft
         3.2.2.34. A cranked shaft and radical bearings
         3.2.2.35. A flywheel and a gear wreath
   3.3. The diesel engine of 2,8 litres
4. System of decrease in toxicity
5. Fuel system
6. Transmission and a running gear
7. A suspension bracket and a steering
8. Brake system
9. A body
10. A body electric equipment
11. Diagnostics of malfunctions
12. Electroschemes





Isuzu Trooper>> Engines>> Electric equipment and major repairs of engines>> Major repairs of engines>> The oil pallet

3.2.2.17. The oil pallet
THE GENERAL DATA

ENGINES 4ZD1 AND 4ZE1

The oil pallet of engines 4ZD1 and 4ZE1 on cars with the wheel formula 4х4

Removal


The prevention

On cars with the wheel formula 4х4 and the petrol engine the oil pallet acts in film after engine removal.


PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Lift the car and establish on supports.
3. Merge oil from the engine.
4. Remove a forward mudguard (if it is provided).
5. Remove a cross-beam (if it is provided).
6. Disconnect a rod of management of a check point on the lever and lower a rod.
7. Remove an arm on the left side картера couplings.
8. Disconnect from the oil pallet a tube of a vacuum highway.
9. Turn away bolts and remove the pallet.

Installation

PERFORMANCE ORDER
1. Clear a demountable plane of the pallet.
2. Establish the pallet, having replaced a lining. Tighten bolts with the moment 4–6 Н.м.
3. Attach to the pallet a tube of a vacuum highway.
4. Establish an arm on the left side картера couplings.
5. Establish a rod.
6. Establish a cross-beam.
7. Establish a forward mudguard (if it is provided).
8. Fill in oil in the engine.
9. Lower the car.
10. Connect the battery to weight. Start the engine and be convinced of absence of a leak.

DIESEL ENGINES

The bottom and top sections of the pallet on diesel engines

The top section of the pallet

Removal

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Remove the engine.
3. Merge oil from the engine. Lift the receiver and щуп маслоуказателя.
4. Turn away bolts of fastening of the top section of the pallet and remove the pallet.

Installation

PERFORMANCE ORDER
1. Clear demountable planes of section of the pallet and the block of cylinders.
2. Establish section, having replaced a lining. Tighten bolts with the moment 14–18 Н.м.
3. Establish the engine.
4. Connect the battery to weight. Start the engine and be convinced of absence of a leak.

The bottom section of the pallet

Removal

PERFORMANCE ORDER
1. Lift the car and establish on supports.
2. Merge oil from the engine.
3. Turn away bolts of fastening of the bottom section of the pallet and remove section.

Installation

PERFORMANCE ORDER
1. Clear demountable planes of the bottom and top section of the pallet.
2. Establish a new lining, having greased condensed places with hermetic. Establish section and tighten bolts with the moment 3–11 Н.м.
3. Fill in oil in the engine. Connect the battery to weight. Start the engine and be convinced of absence of a leak.

ENGINE V6

The oil pallet of engine V6

And – a place of drawing of hermetic
1, 2 – bolts
3 – intensifying linings
4 – nuts

Removal

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Remove маслоуказатель. Lift the car and establish on supports. Merge oil from the engine.
3. Remove a cross-beam and forward section for towing.
4. Turn away fastening bolts каталитического neutralizer to an exhaust pipe. Remove reception section of an exhaust pipe.
5. Disconnect a forward leading shaft from a reducer of the forward bridge.
6. Remove collars from a flywheel cover.
7. Disconnect from a starter conducting sockets. Turn away bolts and remove a starter.
8. Remove a viewing cover of a flywheel.
9. Put labels of mutual orientation to a shaft сошки a wheel and сошку to facilitate assemblage. Turn away a nut сошки and remove сошку from a shaft.
10. Turn away a nut of the pendular lever and remove the pendular lever.
11. Disconnect a rubber hose from сапуна the forward bridge and establish a prop under картер the bridge.
12. Turn away two bolts of the left and right support of the forward bridge and lower the forward bridge.
13. Turn away bolts of fastening of the pallet to the block of cylinders and remove the pallet.
14. Clear demountable planes.

Installation

PERFORMANCE ORDER
1. Establish a new lining, having greased condensed places with hermetic. Establish the pallet. Tighten back bolts with the moment 25 Н.м., other nuts and bolts – with the moment 10 Н.м.
2. Further installation is carried out upside-down. The moments of an inhaling of understanding carving connections:
      – A nut сошки a wheel – 215 Н.м.;
      – A nut of the pendular lever – 117 Н.м.;
      – Bolts of fastening of a forward leading shaft to a reducer of the forward bridge – 62 Н.м.
3. Fill in oil in the engine. Connect the battery to weight.
4. Start the engine and be convinced of absence of a leak.