Isuzu Truper - Isuzu Trooper
1. The maintenance instruction
2. Maintenance service
3. Engines
   3.1. Specifications of the engine and adjusting works
   3.2. An electric equipment and major repairs of engines
      3.2.1. An electric equipment of engines
      3.2.2. Major repairs of engines
         3.2.2.1. Technical characteristics
         3.2.2.2. Instructions on service and engine repair
         3.2.2.3. Dismantle and installation of the power unit
         3.2.2.4. A cover of a head of cylinders
         3.2.2.5. Коромысла and platens коромысел
         3.2.2.6. The thermostat
         3.2.2.7. A soaking up collector
         3.2.2.8. A final collector
         3.2.2.9. Турбокомпрессор
         3.2.2.10. The conditioner
         3.2.2.11. A radiator
         3.2.2.12. The fan of system of cooling with a drive from the electric motor
         3.2.2.13. The pump of a cooling liquid
         3.2.2.14. A head of cylinders
         3.2.2.15. Valves and springs
         3.2.2.16. Pushers
         3.2.2.17. The oil pallet
         3.2.2.18. The oil pump
            3.2.2.18.1. Removal and installation
            3.2.2.18.2. Condition check
         3.2.2.19. An epiploon of a forward cover of a gear belt
         3.2.2.20. A chain of a drive of a camshaft and a drive asterisk
         3.2.2.21. A forward cover of a gear belt
         3.2.2.22. An epiploon of a cranked shaft
         3.2.2.23. A gear belt and натяжитель
         3.2.2.24. A gear belt and the tension mechanism
         3.2.2.25. A drive газораспределительного the mechanism petrol engines
         3.2.2.26. A drive газораспределительного the mechanism diesel engines
         3.2.2.27. A camshaft
         3.2.2.28. Camshaft bearings
         3.2.2.29. Pistons and rods
         3.2.2.30. Shatunnye bearings
         3.2.2.31. Assemblage of shatunno-piston group and installation on the engine
         3.2.2.32. Заглушки and a heater картера the engine
         3.2.2.33. A back epiploon of a cranked shaft
         3.2.2.34. A cranked shaft and radical bearings
         3.2.2.35. A flywheel and a gear wreath
   3.3. The diesel engine of 2,8 litres
4. System of decrease in toxicity
5. Fuel system
6. Transmission and a running gear
7. A suspension bracket and a steering
8. Brake system
9. A body
10. A body electric equipment
11. Diagnostics of malfunctions
12. Electroschemes





Isuzu Trooper>> Engines>> Electric equipment and major repairs of engines>> Major repairs of engines>> The oil pump

3.2.2.18. The oil pump

3.2.2.18.1. Removal and installation
THE GENERAL DATA

ENGINES 4ZD1 AND 4ZE1

Details of the oil pump of engines 4ZD1 and 4ZE1

1 – a nut
2 – an asterisk
3 – an external rotor
4 – шпонка
6 – an internal rotor
7 – the platen
8 – the case
9 – an epiploon

The oil pump on these engines is mounted in a forward bottom part of the engine, the pump drive is carried out from a gear belt.

Removal

PERFORMANCE ORDER
1. Remove the top and bottom covers of a gear belt.
2. Remove a belt from asterisks of a cranked shaft and the oil pump.
3. Turn away a nut of fastening of an asterisk of the oil pump and remove an asterisk.
4. Turn away bolts of fastening of the oil pump to the engine and remove the pump.

Installation

PERFORMANCE ORDER
1. Put in the pump technical vaseline.
2. Establish the pump with a new sealing ring, tighten bolts of fastening with the moment 14–22 Н.м.
3. Establish an asterisk of a drive of the pump and tighten a nut with the moment 63–86 Н.м.
4. Combine labels on an asterisk of a cranked shaft and a conducted gear wheel of a camshaft and dress a gear belt.
5. Fill in oil in the engine. Start the engine and be convinced of absence of a leak.

ENGINE V6

The oil pump of engines V6

And – to a forward part of the engine

1 – a bolt

2 – the oil pump

3 – a shaft

On this engine the oil pump is mounted on the block of cylinders in the oil pallet.

Removal

PERFORMANCE ORDER
1. Disconnect the battery from weight. Lift the car and establish on supports.
2. Merge oil from the engine. Remove the oil pallet (subsection 3.2.2.17 see).
3. Turn away bolts and remove the oil pump.

Installation

PERFORMANCE ORDER
1. Combine the platen of the pump with шестигранным deepening and establish the pump. Tighten bolts with the moment 41 Н.м.
2. Establish the pallet.
3. Connect the battery to weight. Fill in oil in the engine, start the engine and be convinced of absence of a leak.

DIESEL ENGINES С223 AND С223Т

Details of the oil pump of diesel engines С223

1 – a tube
2 – the filter of rough clearing
3 – a cover
4 – a rotor
5 – a pin of a gear wheel of a drive
6 – a drive gear wheel
7 – a rotor with the platen

Details of the oil pump of diesel engines С223Т

1 – a tube
2 – the filter of rough clearing
3 – a cover
4 – a conducted gear wheel
5 – a pin of a gear wheel of a drive
6 – a gear wheel
7 – a leading gear wheel

Removal

PERFORMANCE ORDER
1. Disconnect the battery from weight. Merge oil from the engine.
2. Remove the engine.
3. Remove the oil pallet (subsection 3.2.2.17 see).
4. Disconnect from the oil pump a tube of an exit of oil. Turn away bolts and remove the oil pump.

Installation

PERFORMANCE ORDER
1. Clear demountable planes under a lining.
2. Establish the pump with a new lining, attach to the oil pump a tube. Tighten bolts with the moment 14–22 Н.м.
3. Establish the pallet.
4. Establish the engine.
5. Connect the battery to weight. Fill in oil in the engine, start the engine and be convinced of absence of a leak.