Isuzu Truper - Isuzu Trooper
1. The maintenance instruction
2. Maintenance service
3. Engines
   3.1. Specifications of the engine and adjusting works
   3.2. An electric equipment and major repairs of engines
      3.2.1. An electric equipment of engines
      3.2.2. Major repairs of engines
         3.2.2.1. Technical characteristics
         3.2.2.2. Instructions on service and engine repair
         3.2.2.3. Dismantle and installation of the power unit
         3.2.2.4. A cover of a head of cylinders
         3.2.2.5. Коромысла and platens коромысел
         3.2.2.6. The thermostat
         3.2.2.7. A soaking up collector
         3.2.2.8. A final collector
         3.2.2.9. Турбокомпрессор
         3.2.2.10. The conditioner
         3.2.2.11. A radiator
         3.2.2.12. The fan of system of cooling with a drive from the electric motor
         3.2.2.13. The pump of a cooling liquid
         3.2.2.14. A head of cylinders
         3.2.2.15. Valves and springs
         3.2.2.16. Pushers
         3.2.2.17. The oil pallet
         3.2.2.18. The oil pump
         3.2.2.19. An epiploon of a forward cover of a gear belt
         3.2.2.20. A chain of a drive of a camshaft and a drive asterisk
         3.2.2.21. A forward cover of a gear belt
         3.2.2.22. An epiploon of a cranked shaft
         3.2.2.23. A gear belt and натяжитель
         3.2.2.24. A gear belt and the tension mechanism
         3.2.2.25. A drive газораспределительного the mechanism petrol engines
         3.2.2.26. A drive газораспределительного the mechanism diesel engines
         3.2.2.27. A camshaft
         3.2.2.28. Camshaft bearings
         3.2.2.29. Pistons and rods
         3.2.2.30. Shatunnye bearings
         3.2.2.31. Assemblage of shatunno-piston group and installation on the engine
         3.2.2.32. Заглушки and a heater картера the engine
         3.2.2.33. A back epiploon of a cranked shaft
         3.2.2.34. A cranked shaft and radical bearings
         3.2.2.35. A flywheel and a gear wreath
   3.3. The diesel engine of 2,8 litres
4. System of decrease in toxicity
5. Fuel system
6. Transmission and a running gear
7. A suspension bracket and a steering
8. Brake system
9. A body
10. A body electric equipment
11. Diagnostics of malfunctions
12. Electroschemes





Isuzu Trooper>> Engines>> Electric equipment and major repairs of engines>> Major repairs of engines>> Chain of a drive of a camshaft and drive asterisk

3.2.2.20. A chain of a drive of a camshaft and a drive asterisk
THE GENERAL DATA

ENGINE V6

Adjusting labels of a chain drive of a camshaft on engines V6

And – the piston of 1st cylinder in ВМТ a compression step

In – the piston of 4th cylinder in ВМТ a compression step

1 – a bolt

Removal

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Establish the piston of 1st cylinder in ВМТ a compression step.
3. Remove a forward cover.
4. Check up a condition of asterisks, presence on them of signs of deterioration and the broken teeths.
5. Check up a chain condition. If the chain can be delayed from успокоителя more than on 9,5 mm the chain is worn out and is subject to replacement.
6. Turn away bolts of fastening of an asterisk to a camshaft, remove an asterisk and a chain. If necessary bring down an asterisk from a camshaft easy blows of a hammer.
7. Press an asterisk from a cranked shaft.

Installation

PERFORMANCE ORDER
1. Напрессуйте an asterisk on a cranked shaft, having paid attention to that the adjusting label has been turned upwards.
2. Grease a persistent surface of an asterisk of a camshaft молибденовой with greasing Molykote or equivalent, dress on an asterisk a chain.
3. Keeping in vertical position an asterisk, combine labels on asterisks of a cranked shaft and a camshaft.
4. Combine a pin on a camshaft with an aperture in an asterisk, tighten bolts with the moment 23 Н.м.
5. Oil a chain for the engine.
6. Establish a forward cover and a pulley of a cranked shaft.
7. Connect the battery to weight.
8. Start the engine, check up ignition installation, if necessary adjust.