Isuzu Truper - Isuzu Trooper
1. The maintenance instruction
2. Maintenance service
3. Engines
   3.1. Specifications of the engine and adjusting works
   3.2. An electric equipment and major repairs of engines
      3.2.1. An electric equipment of engines
      3.2.2. Major repairs of engines
         3.2.2.1. Technical characteristics
         3.2.2.2. Instructions on service and engine repair
         3.2.2.3. Dismantle and installation of the power unit
         3.2.2.4. A cover of a head of cylinders
         3.2.2.5. Коромысла and platens коромысел
         3.2.2.6. The thermostat
         3.2.2.7. A soaking up collector
         3.2.2.8. A final collector
         3.2.2.9. Турбокомпрессор
         3.2.2.10. The conditioner
         3.2.2.11. A radiator
         3.2.2.12. The fan of system of cooling with a drive from the electric motor
         3.2.2.13. The pump of a cooling liquid
         3.2.2.14. A head of cylinders
         3.2.2.15. Valves and springs
         3.2.2.16. Pushers
         3.2.2.17. The oil pallet
         3.2.2.18. The oil pump
         3.2.2.19. An epiploon of a forward cover of a gear belt
         3.2.2.20. A chain of a drive of a camshaft and a drive asterisk
         3.2.2.21. A forward cover of a gear belt
         3.2.2.22. An epiploon of a cranked shaft
         3.2.2.23. A gear belt and натяжитель
         3.2.2.24. A gear belt and the tension mechanism
         3.2.2.25. A drive газораспределительного the mechanism petrol engines
         3.2.2.26. A drive газораспределительного the mechanism diesel engines
         3.2.2.27. A camshaft
         3.2.2.28. Camshaft bearings
         3.2.2.29. Pistons and rods
         3.2.2.30. Shatunnye bearings
         3.2.2.31. Assemblage of shatunno-piston group and installation on the engine
         3.2.2.32. Заглушки and a heater картера the engine
         3.2.2.33. A back epiploon of a cranked shaft
         3.2.2.34. A cranked shaft and radical bearings
         3.2.2.35. A flywheel and a gear wreath
   3.3. The diesel engine of 2,8 litres
4. System of decrease in toxicity
5. Fuel system
6. Transmission and a running gear
7. A suspension bracket and a steering
8. Brake system
9. A body
10. A body electric equipment
11. Diagnostics of malfunctions
12. Electroschemes





Isuzu Trooper>> Engines>> Electric equipment and major repairs of engines>> Major repairs of engines>> Forward cover of a gear belt

3.2.2.21. A forward cover of a gear belt

ENGINES 4ZD1 AND 4ZE1

Removal

PERFORMANCE ORDER
1. Disconnect the battery from weight, merge cooling liquid.
2. Disconnect from a radiator inlet and final hoses and remove a radiator.
3. Remove belts of a drive of the generator and the conditioner compressor. Remove the fan of system of cooling.
4. Turn away the central bolt of a pulley of a cranked shaft, remove a pulley with a nave.
5. Remove a belt of a drive of the air pump and take the pump aside. Remove the compressor of the conditioner and take aside (if it is provided). Remove a conditioner arm.
6. Remove (if necessary) the ignition distributor.
7. Remove a pulley of the pump of a cooling liquid. Remove the top section of a forward cover and the pump of a cooling liquid.
8. Remove the bottom section of a forward cover.

Installation

PERFORMANCE ORDER
1. Establish the bottom section of a forward cover.
2. Establish the top section of a forward cover and the pump of a cooling liquid.
3. Establish the ignition distributor (if has been removed).
4. Establish the air pump, dress a drive belt. Establish the compressor of the conditioner and a compressor arm.
5. Establish a pulley with a nave and wrap the central bolt of a pulley of a cranked shaft.
6. Dress a belt of a drive of the generator and the conditioner compressor, establish the fan of system of cooling.
7. Establish a radiator, attach to a radiator inlet and final hoses.
8. Connect the battery to weight, fill in cooling liquid. Check up absence of a leak.

DIESEL ENGINES

Removal

PERFORMANCE ORDER
1. Disconnect the battery from weight, merge cooling liquid.
2. Remove the fan of system of cooling and a belt (or belts) a drive. Remove the generator with an arm.
3. Disconnect from a radiator hoses and remove a radiator.
4. Put labels and disconnect sockets and vacuum hoses which can prevent removal.
5. Remove a pulley of a cranked shaft.
6. Turn away bolts of a forward cover and uncover.

Installation

PERFORMANCE ORDER
1. Establish a forward cover, turn and tighten bolts.
2. Establish a pulley of a cranked shaft.
3. Attach sockets and vacuum hoses.
4. Establish a radiator, attach hoses.
5. Establish the fan of system of cooling, put on a belt (or belts) a drive. Establish the generator with an arm.
6. Connect the battery to weight.
7. Fill in cooling liquid.
8. Start the engine, warm up to normal temperature and check up absence of a leak.