Isuzu Truper - Isuzu Trooper
1. The maintenance instruction
2. Maintenance service
3. Engines
   3.1. Specifications of the engine and adjusting works
   3.2. An electric equipment and major repairs of engines
      3.2.1. An electric equipment of engines
      3.2.2. Major repairs of engines
         3.2.2.1. Technical characteristics
         3.2.2.2. Instructions on service and engine repair
         3.2.2.3. Dismantle and installation of the power unit
         3.2.2.4. A cover of a head of cylinders
         3.2.2.5. Коромысла and platens коромысел
         3.2.2.6. The thermostat
         3.2.2.7. A soaking up collector
         3.2.2.8. A final collector
         3.2.2.9. Турбокомпрессор
         3.2.2.10. The conditioner
         3.2.2.11. A radiator
         3.2.2.12. The fan of system of cooling with a drive from the electric motor
         3.2.2.13. The pump of a cooling liquid
         3.2.2.14. A head of cylinders
         3.2.2.15. Valves and springs
         3.2.2.16. Pushers
         3.2.2.17. The oil pallet
         3.2.2.18. The oil pump
         3.2.2.19. An epiploon of a forward cover of a gear belt
         3.2.2.20. A chain of a drive of a camshaft and a drive asterisk
         3.2.2.21. A forward cover of a gear belt
         3.2.2.22. An epiploon of a cranked shaft
         3.2.2.23. A gear belt and натяжитель
         3.2.2.24. A gear belt and the tension mechanism
         3.2.2.25. A drive газораспределительного the mechanism petrol engines
         3.2.2.26. A drive газораспределительного the mechanism diesel engines
         3.2.2.27. A camshaft
         3.2.2.28. Camshaft bearings
         3.2.2.29. Pistons and rods
         3.2.2.30. Shatunnye bearings
         3.2.2.31. Assemblage of shatunno-piston group and installation on the engine
         3.2.2.32. Заглушки and a heater картера the engine
         3.2.2.33. A back epiploon of a cranked shaft
         3.2.2.34. A cranked shaft and radical bearings
         3.2.2.35. A flywheel and a gear wreath
   3.3. The diesel engine of 2,8 litres
4. System of decrease in toxicity
5. Fuel system
6. Transmission and a running gear
7. A suspension bracket and a steering
8. Brake system
9. A body
10. A body electric equipment
11. Diagnostics of malfunctions
12. Electroschemes





Isuzu Trooper>> Engines>> Electric equipment and major repairs of engines>> Major repairs of engines>> Epiploon of a cranked shaft

3.2.2.22. An epiploon of a cranked shaft

PETROL 4-CYLINDER ENGINES

Removal

PERFORMANCE ORDER
1. Disconnect the battery from weight. Remove a pulley of a cranked shaft.
2. Remove the top and bottom covers of a gear belt.
3. Turn a cranked shaft so that labels on an asterisk of a camshaft and on a back cover of a gear belt were combined, and шпонка on a sock of a cranked shaft was established opposite to a cover of the holder of an epiploon. When the specified labels are combined, the piston of 4th cylinder is in ВМТ a compression step.
4. Ослабьте a tension of a gear belt, having released a bolt натяжителя, remove a belt from an asterisk of a cranked shaft.
5. Turn away a bolt of an asterisk of a cranked shaft, remove an asterisk, шпонку and маслоотражательный a guard.
6. Cautiously выпрессуйте an epiploon from the holder, having hooked its small screw-driver.

Installation

PERFORMANCE ORDER
1. Oil a new epiploon for the engine and запрессуйте it in the holder easy blows on оправке.
2. Establish a guard, шпонку, an asterisk of a cranked shaft and wrap a bolt.
3. Combine an adjusting label on an asterisk of a cranked shaft, put on a gear belt.
4. Release a spring and pull a gear belt.
5. Turn a cranked shaft on 2 complete revolutions in a direction opposite to normal rotation and again combine adjusting labels.
6. Ослабьте a bolt натяжителя that the roller has rested against a belt, and the correct tension was provided.
7. Establish covers of a gear belt and a pulley of a cranked shaft.
8. Other procedures are carried out upside-down.

DIESEL ENGINES

Removal

PERFORMANCE ORDER
1. Disconnect the battery from weight, merge cooling liquid.
2. Remove a gear belt.
3. Turn away a bolt of a pulley of a cranked shaft. For отворачивания a bolt it can be necessary to stop a flywheel, to exclude проворачивание a cranked shaft for what it is necessary to remove a starter, or a flywheel cover.
4. Press from a cranked shaft an asterisk.
5. Turn away bolts of fastening of the holder of an epiploon to a back cover of a gear belt, remove the holder.
6. Press an epiploon, having hooked its small screw-driver.

Installation

PERFORMANCE ORDER
1. Oil working edges of a new epiploon for the engine, запрессуйте an epiploon into place.
2. Establish the holder of an epiploon.
3. Establish on a cranked shaft a leading asterisk.
4. Establish a gear belt.
5. Fill in cooling liquid, establish ignition, start the engine and be convinced of absence of a leak.