Isuzu Truper - Isuzu Trooper
1. The maintenance instruction
2. Maintenance service
3. Engines
   3.1. Specifications of the engine and adjusting works
   3.2. An electric equipment and major repairs of engines
      3.2.1. An electric equipment of engines
      3.2.2. Major repairs of engines
         3.2.2.1. Technical characteristics
         3.2.2.2. Instructions on service and engine repair
         3.2.2.3. Dismantle and installation of the power unit
         3.2.2.4. A cover of a head of cylinders
         3.2.2.5. Коромысла and platens коромысел
         3.2.2.6. The thermostat
         3.2.2.7. A soaking up collector
         3.2.2.8. A final collector
         3.2.2.9. Турбокомпрессор
         3.2.2.10. The conditioner
         3.2.2.11. A radiator
         3.2.2.12. The fan of system of cooling with a drive from the electric motor
         3.2.2.13. The pump of a cooling liquid
         3.2.2.14. A head of cylinders
         3.2.2.15. Valves and springs
         3.2.2.16. Pushers
         3.2.2.17. The oil pallet
         3.2.2.18. The oil pump
         3.2.2.19. An epiploon of a forward cover of a gear belt
         3.2.2.20. A chain of a drive of a camshaft and a drive asterisk
         3.2.2.21. A forward cover of a gear belt
         3.2.2.22. An epiploon of a cranked shaft
         3.2.2.23. A gear belt and натяжитель
         3.2.2.24. A gear belt and the tension mechanism
         3.2.2.25. A drive газораспределительного the mechanism petrol engines
         3.2.2.26. A drive газораспределительного the mechanism diesel engines
         3.2.2.27. A camshaft
         3.2.2.28. Camshaft bearings
         3.2.2.29. Pistons and rods
         3.2.2.30. Shatunnye bearings
         3.2.2.31. Assemblage of shatunno-piston group and installation on the engine
         3.2.2.32. Заглушки and a heater картера the engine
         3.2.2.33. A back epiploon of a cranked shaft
         3.2.2.34. A cranked shaft and radical bearings
         3.2.2.35. A flywheel and a gear wreath
   3.3. The diesel engine of 2,8 litres
4. System of decrease in toxicity
5. Fuel system
6. Transmission and a running gear
7. A suspension bracket and a steering
8. Brake system
9. A body
10. A body electric equipment
11. Diagnostics of malfunctions
12. Electroschemes





Isuzu Trooper>> Engines>> Electric equipment and major repairs of engines>> Major repairs of engines>> Final collector

3.2.2.8. A final collector
THE GENERAL DATA

Final collector and the gauge of the maintenance of oxygen

ENGINES 4ZD1

Removal

PERFORMANCE ORDER
1. Depressurize fuel system, observing rules. Disconnect the battery from weight. Remove the air filter.
2. Turn away an arm bolt рециркуляционной tubes in a back part of a head of cylinders.
3. Lift the car, establish on supports. Remove рециркуляционную a tube from soaking up and final collectors.
4. Remove from a final collector an exhaust pipe. Disconnect a wire from the gauge of the maintenance of oxygen.
5. Remove a thermal guard and a heater.
6. Turn away a nut and fastening bolts, remove a collector.

Installation

PERFORMANCE ORDER
1. Replace a lining of a final collector, establish a collector and tighten nuts and bolts of a collector with the moment 20–25 Н.м.
2. Establish a heater and a thermal guard.
3. Attach to a final collector an exhaust pipe. Attach a wire to the gauge of the maintenance of oxygen.
4. Establish рециркуляционную a tube to both collectors and lower the car.
5. Wrap an arm bolt рециркуляционной tubes in a back part of a head of cylinders.
6. Establish the air filter. Connect the battery to weight.

ENGINES 4ZЕ1

Removal

PERFORMANCE ORDER
1. Disconnect the battery from weight. Remove an air line.
2. Disconnect hoses from the air pump.
3. Turn away bolts of fastening of the pump, remove a belt of a drive and the pump.
4. Turn away a fastening bolt рециркуляционной tubes in a back part of a head of cylinders.
5. Lift the car and establish on supports. Disconnect рециркуляционную a tube from both collectors. If necessary remove маслоуказатель with a branch pipe.
6. Disconnect from a final collector an exhaust pipe. Disconnect a socket from the oxygen gauge.
7. Remove a thermal guard of a collector.
8. Turn away a nut of fastening of a collector to a head of cylinders and remove a collector.

Installation

PERFORMANCE ORDER
1. Establish a new lining of a collector, a collector and tighten nuts of fastening with the moment 22 Н.м.
2. Establish a thermal guard of a collector.
3. Attach to final a collector an exhaust pipe, attach a socket to the oxygen gauge.
4. Attach рециркуляционную a tube to both collectors. Lower the car.
5. Wrap an arm bolt рециркуляционной tubes in a back part of a head of cylinders.
6. Establish an air line. Connect the battery to weight.

ENGINE V6

Final collector of engine V6

Removal

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Lift the car and establish on supports.
3. Remove from a final collector an exhaust pipe.
4. Lower the car, turn away back bolts of a collector.
5. Remove on the right side of a thermal guard, an arm of the air pump and a generator arm.
6. On the left side remove a pipe of a heater and an arm of the hydraulic booster of a wheel.
7. Turn away bolts of fastening of a final collector to a head of cylinders, remove a collector.
8. Remove the rests of old consolidation.

Installation

PERFORMANCE ORDER
1. Establish a collector, having replaced a lining, tighten bolts of a collector with the moment 25 Н.м.
2. On the left side establish a pipe of a heater and an arm of the hydraulic booster of a wheel.
3. On the right side establish a thermal guard, an arm of the air pump and a generator arm.
4. Lift the car and establish on supports.
5. Establish an exhaust pipe, tighten bolts.
6. Lower the car and connect the battery to weight.