Isuzu Truper - Isuzu Trooper
1. The maintenance instruction
2. Maintenance service
3. Engines
   3.1. Specifications of the engine and adjusting works
   3.2. An electric equipment and major repairs of engines
   3.3. The diesel engine of 2,8 litres
      3.3.1. Introduction
      3.3.2. Technical characteristics
      3.3.3. Compression check
      3.3.4. The top dead point of the piston № 1 (ВМТ)
      3.3.5. Backlashes of valves
      3.3.6. A cover of a head of cylinders
      3.3.7. A pulley of a cranked shaft
      3.3.8. Casings of a gear belt of a drive of a camshaft
      3.3.9. A gear belt of a drive of a camshaft
      3.3.10. Asterisks of a gear belt, натяжитель and intermediate pulleys
      3.3.11. Коромысла and pushers
      3.3.12. A head of the block of cylinders
      3.3.13. Oil картер
      3.3.14. The oil pump
      3.3.15. An oil radiator
      3.3.16. Epiploons of a camshaft and a cranked shaft
      3.3.17. A flywheel
      3.3.18. Fastenings of the engine / of a transmission
4. System of decrease in toxicity
5. Fuel system
6. Transmission and a running gear
7. A suspension bracket and a steering
8. Brake system
9. A body
10. A body electric equipment
11. Diagnostics of malfunctions
12. Electroschemes

Isuzu Trooper>> Engines>> The diesel engine of 2,8 litres>> Pulley of a cranked shaft

3.3.7. A pulley of a cranked shaft


1. Remove cooling fan and joints.
2. Remove auxiliary приводные belts.
3. Ослабьте also unscrew four bolts, крепящих a pulley of a cranked shaft to its plug and remove a pulley.
4. If the adjusting pin of a pulley is fixed not rigidly, remove it and postpone together with a pulley.


1. Check up, that the adjusting pin has been inserted into the nest, then establish a pulley, having combined it with a pin.
2. Establish four fixing bolts and reliably them tighten.
3. Establish auxiliary приводные belts.
4. Establish the fan of cooling of a radiator.