Isuzu Trooper>> Fuel system>> Removal and installation of the pump mounted in a fuel tank

5.5. Removal and installation of the pump mounted in a fuel tank
THE GENERAL DATA

The prevention

Strictly observe the order of works described more low, creation of a fire-dangerous situation otherwise is possible.


Removal

PERFORMANCE ORDER
1. Depressurize fuel system and disconnect the battery from weight.
2. Lift the car and establish on supports. Merge fuel from a tank. Turn away screws and remove the bottom guards (if are provided).
3. Disconnect all wires and gasoline pipe line hoses.
4. Remove a pipe of a jellied mouth and an arm.
5. Disconnect a ventilating hose.
6. Disconnect a hose of system of catching of steams of gasoline. Substitute under a tank a prop and lay a board.
7. Turn away bolts and remove a tank. Disconnect a hose from the pump to the fuel filter.
8. Remove the fuel pump in gathering with an arm.
9. Remove an arm, a pillow and the filter.

Installation

PERFORMANCE ORDER
1. Collect the pump with an arm, a pillow and the filter.
2. Establish the fuel pump in gathering with an arm.
3. Establish a tank, wrap bolts of coupling tapes of a tank. Tighten bolts.
4. Attach a hose of system of catching of steams of gasoline.
5. Attach a pipe of a jellied mouth, establish an arm.
6. Attach all wires and gasoline pipe line hoses. Establish the bottom guards.
7. Lower the car, fill in gasoline, be convinced of absence of a leak.
8. Connect the battery to weight.