Isuzu Truper - Isuzu Trooper
1. The maintenance instruction
2. Maintenance service
3. Engines
4. System of decrease in toxicity
5. Fuel system
   5.1. Safety measures
   5.2. An order of depressurization of fuel system
   5.3. The mechanical fuel pump
   5.4. The electric fuel pump
   5.5. Removal and installation of the pump mounted in a fuel tank
   5.6. Carburettor adjustment
   5.7. Removal and carburettor installation
   5.8. Systems of injection of fuel
      5.8.1. Systems of injection of 4-cylinder engines
      5.8.2. Features of system of injection of 6-cylinder engines
      5.8.3. Knots and units of system of injection
      5.8.4. Safety measures at service of fuel system
      5.8.5. Replacement of knots and system units
         5.8.5.1. The case throttle заслонки
         5.8.5.2. Atomizers
   5.9. The power supply system of diesel engines
6. Transmission and a running gear
7. A suspension bracket and a steering
8. Brake system
9. A body
10. A body electric equipment
11. Diagnostics of malfunctions
12. Electroschemes





Isuzu Trooper>> Fuel system>> Systems of injection of fuel>> Replacement of knots and system units

5.8.5. Replacement of knots and system units

5.8.5.1. The case throttle заслонки

ALL ENGINES, EXCEPT 6-CYLINDER

Removal

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Remove an air line.
3. Merge cooling liquid to level below the case throttle заслонки.
4. Disconnect a cable of a drive throttle заслонки, vacuum hoses and hoses of a cooling liquid.
5. Turn away bolts and remove the case throttle заслонки.

Installation

PERFORMANCE ORDER
1. Clear the rests of consolidation by a scraper and solvent.
2. Establish the case throttle заслонки, wrap bolts.
3. Attach a cable of a drive throttle заслонки, vacuum hoses and hoses of a cooling liquid.
4. Add cooling liquid.
5. Establish an air line.
6. Connect the battery to weight.

6-CYLINDER ENGINES

Removal throttle заслонки

1 – the case throttle заслонки

2 – a bolt (the moment of an inhaling 25 Н.м.)

3 – a lining

4 – a soaking up collector

Removal

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Depressurize fuel system, remove an air line.
3. Disconnect sockets from the case throttle заслонки.
4. Disconnect drive cables заслонки, the cruise-control and management of transmission.
5. Remove arms of cables.
6. Disconnect vacuum hoses preliminary them having marked.
7. Turn away a nut of unions and disconnect direct and return gasoline pipe lines.
8. Turn away bolts and remove the case throttle заслонки in gathering.
9. Muffle apertures in a soaking up collector.

Installation

PERFORMANCE ORDER
1. Clear the consolidation rests on a demountable plane of the case.
2. Establish a new lining, the case throttle заслонки wrap bolts.
3. Replace linings of unions and attach direct and return gasoline pipe lines, wrap nuts, tighten with the moment 27 Н.м.
4. Attach vacuum hoses.
5. Establish arms of cables.
6. Establish cables of a drive throttle заслонки, the cruise-control and management of transmission.
7. Attach sockets on the case throttle заслонки. Be convinced of reliability of fastening of sockets.
8. Establish an air line, connect the battery to weight.
9. Slightly press a pedal throttle заслонки and establish the air valve of idling (IAC-valve) in a starting position, start the engine, later 3 сек switch off ignition for 10 seconds. Again start the engine and be convinced that adjustment of turns of idling is not broken.