Isuzu Truper - Isuzu Trooper
1. The maintenance instruction
2. Maintenance service
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and a running gear
   6.1. A manual transmission
   6.2. Automatic transmission
      6.2.1. The pallet картера transmissions
      6.2.2. Adjustment of a cable of a drive throttle заслонки
      6.2.3. Adjustment of a cable of a choice of transfers
      6.2.4. Adjustment of the blocking switch
      6.2.5. Removal and installation of automatic transmission
      6.2.6. A distributing box
      6.2.7. Definition of malfunction of the back bridge
      6.2.8. A distributing box with lateral configuration on transmission
   6.3. A running gear
7. A suspension bracket and a steering
8. Brake system
9. A body
10. A body electric equipment
11. Diagnostics of malfunctions
12. Electroschemes





Isuzu Trooper>> Transmission and running gear>> Automatic transmission>> The pallet картера transmissions

6.2.1. The pallet картера transmissions Removal and installation

PERFORMANCE ORDER
1. Disconnect the battery from weight, lift the car and establish on supports.
2. Establish under transmission a support. Turn away bolts and nuts of fastening of a stretcher of transmission, displace a stretcher back so that the tail part of a shaft leant against it.
3. Turn away some bolts of fastening of the pallet, release other bolts so that the liquid has merged in the substituted pallet.
The prevention

On some cars the drain stopper, which moment of an inhaling 40 Н.м is provided.


4. After a drain of all liquid turn out bolts and remove the pallet.
5. Turn away bolts and remove the filter трансмиссионной liquids.
6. Establish the new filter, wrap bolts. Tighten bolts with the moment 7 Н.м.
7. Remove the rests of a material of consolidation from demountable planes of the pallet and картера transmissions. Remove a magnet and clear. Wash out the pallet solvent and dry.
8. Put on a demountable plane of the pallet hermetic and establish the pallet. Tighten bolts with the moment 7–14 Н.м.

Filter replacement

PERFORMANCE ORDER
After pallet removal remove holders of the filter. After a drain of the remained liquid establish the new filter and holders.