Isuzu Truper - Isuzu Trooper
1. The maintenance instruction
2. Maintenance service
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and a running gear
   6.1. A manual transmission
   6.2. Automatic transmission
      6.2.1. The pallet картера transmissions
      6.2.2. Adjustment of a cable of a drive throttle заслонки
      6.2.3. Adjustment of a cable of a choice of transfers
      6.2.4. Adjustment of the blocking switch
      6.2.5. Removal and installation of automatic transmission
      6.2.6. A distributing box
      6.2.7. Definition of malfunction of the back bridge
      6.2.8. A distributing box with lateral configuration on transmission
   6.3. A running gear
7. A suspension bracket and a steering
8. Brake system
9. A body
10. A body electric equipment
11. Diagnostics of malfunctions
12. Electroschemes





Isuzu Trooper>> Transmission and running gear>> Automatic transmission>> Distributing box with lateral configuration on transmission

6.2.8. A distributing box with lateral configuration on transmission
THE GENERAL DATA

CARS TROOPER/BIGHORN

Details of a distributing box with lateral configuration (cars Trooper/Bighorn)

1 – a spring and a clamp ball
2 – заглушки
3 – заглушки
4 – a rod
5 – a side scene and a plug of switching-off of one leading bridge
6 – a rod
7 – an inclusion plug демультипликатора
8 – a directing pin
9 – a shaft of an intermediate gear wheel
10 – the needle bearing and an intermediate gear wheel

11 – a persistent washer
12 – a persistent washer
13 – a cover of a shaft of selection of capacity of the forward bridge
14 – a remote washer
15 – a shaft of selection of capacity of the forward bridge
16 – a conducted gear wheel of a forward shaft of selection of capacity
17 – bearings
18 – bearings


Removal of a rod and intermediate gear wheel from a distributing box with lateral configuration (cars Trooper/Bighorn)


Dismantling

PERFORMANCE ORDER
1. Remove balls and springs of clamps.
2. Turn out заглушки.
3. Turn out the others заглушки.
4. Remove a rod.
5. Get a plug and a side scene of inclusion of the second leading bridge.
6. Remove a pin and remove a rod.
7. Remove an inclusion plug демультипликатора.
8. Get directing pin.
9. Remove a shaft of an intermediate gear wheel.
10. Remove an intermediate gear wheel and needle bearings.
11. Remove persistent washers.
12. Remove washers.
13. Uncover a forward shaft of selection of capacity.
14. Remove the remote plug.
15. Remove a shaft.
16. Remove a gear wheel of a shaft of selection of capacity.
17. Remove forward and back bearings.

Assemblage

PERFORMANCE ORDER
1. Establish forward and back bearings.
2. Establish a gear wheel of a shaft of selection of capacity.
3. Establish a forward shaft of selection of capacity.
4. Establish the remote plug.
5. Establish a cover of a forward shaft.
6. Establish persistent washers.
7. Establish an intermediate gear wheel and needle bearings.
8. Establish a shaft of an intermediate gear wheel.
9. Establish directing pin.
10. Establish an inclusion plug демультипликатора.
11. Establish a plug rod.
12. Establish a plug, a side scene and a rod of inclusion of the second leading bridge.
13. Turn заглушки.
14. Establish balls and springs of clamps.