Isuzu Truper - Isuzu Trooper
1. The maintenance instruction
2. Maintenance service
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and a running gear
   6.1. A manual transmission
   6.2. Automatic transmission
   6.3. A running gear
      6.3.1. Forward карданный a shaft, semiaxes and SHRUS
      6.3.2. An internal SHRUS
      6.3.3. Removal and installation forward карданного a shaft
      6.3.4. Dismantling карданных hinges
      6.3.5. Back карданный a shaft
      6.3.6. An average support
      6.3.7. The back bridge
      6.3.8. The forward leading bridge
7. A suspension bracket and a steering
8. Brake system
9. A body
10. A body electric equipment
11. Diagnostics of malfunctions
12. Electroschemes





Isuzu Trooper>> Transmission and running gear>> Running gear

6.3. A running gear

6.3.1. Forward карданный a shaft, semiaxes and SHRUS
THE GENERAL DATA

CARS AMIGO/MU/JAZZ, RODEO/PASSPORT AND TROOPER/BIGHORN

The forward leading bridge and SHRUS

1 – a forward disk of a brake in gathering with a nave, a rotary pin, a brake board, a rack and the bottom arm of a rack
2 – карданный a shaft
3 – a bolt
4 – washers
5 – the forward bridge
6 – washers

Removal

PERFORMANCE ORDER
1. Lift the car and establish on supports.
2. Disconnect from differential forward карданный a shaft.
3. Remove forward wheels and a towing frame.
4. Completely unload торсион, having turned away bolts of adjustment of a road clearance.
5. Remove bars of racks of a forward suspension bracket.
6. Disconnect draughts of the stabilizer from the bottom levers.
7. Remove supports of disk brakes, adhere their wire to a frame, a highway of a hydrodrive of brakes not to disconnect.
8. Disconnect hinges of helmsmen реек.
9. Disconnect the top levers of a suspension bracket from a frame, pay attention to quantity of adjusting washers of levers and their arrangement.
10. Disconnect steering draughts from the bottom levers.
11. Disconnect from the bottom levers shock-absorbers.
12. Remove the bottom levers of a suspension bracket.
13. Remove a wheel nave in gathering with the blocking mechanism.
14. Remove disks and the top draughts.
15. Remove steering сошку and the pendular lever in gathering with draughts.
16. Cautiously lower картер differential, without having damaged thus hinges.
17. Merge from картера oil, turn away 4 bolts of fastening of flanges of cases of semiaxes to картеру differential.

18. Get semiaxes.


Installation

PERFORMANCE ORDER
1. Establish semiaxes, turn on 4 bolts of fastening of flanges of cases of semiaxes to картеру differential.
2. Establish steering сошку and the pendular lever in gathering with draughts.
3. Establish disks and the top draughts.
4. Establish a nave of a wheel with the mechanism of automatic blocking.
5. Establish the bottom levers of a suspension bracket.
6. Attach shock-absorbers to the bottom levers.
7. Attach steering bent for to the bottom levers.
8. Attach the top levers of a suspension bracket, without breaking initial quantity and an order of an arrangement of washers.
9. Attach tips of helmsmen реек.
10. Establish supports of disk brakes.
11. Attach draughts of the stabilizer for the bottom levers.
12. Attach bars of racks of a forward suspension bracket.
13. Adjust a road clearance, having wrapped lever bolts.
14. Establish forward wheels and a towing frame.
15. Attach to differential карданный a shaft.
16. Lower the car.