Isuzu Truper - Isuzu Trooper
1. The maintenance instruction
2. Maintenance service
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and a running gear
   6.1. A manual transmission
   6.2. Automatic transmission
   6.3. A running gear
      6.3.1. Forward карданный a shaft, semiaxes and SHRUS
      6.3.2. An internal SHRUS
      6.3.3. Removal and installation forward карданного a shaft
      6.3.4. Dismantling карданных hinges
      6.3.5. Back карданный a shaft
      6.3.6. An average support
      6.3.7. The back bridge
      6.3.8. The forward leading bridge
7. A suspension bracket and a steering
8. Brake system
9. A body
10. A body electric equipment
11. Diagnostics of malfunctions
12. Electroschemes





Isuzu Trooper>> Transmission and running gear>> Running gear>> Internal SHRUS

6.3.2. An internal SHRUS Dismantling

PERFORMANCE ORDER
1. Disconnect the battery from weight. Clear the hinge of a dirt and greasing.
2. Remove from a cover of the internal hinge collars. Pull together a cover from the hinge.
3. Remove an internal spring ring. Get полуось from the internal hinge.
4. Remove a lock ring of a holder of balls, get a holder. Remove with шлицов a ball holder and the hinge case.
5. Remove covers and гаситель fluctuations (if it is provided). The external hinge not folding also is replaced entirely.
6. Clear of a dirt and greasing.

Assemblage

PERFORMANCE ORDER
1. Bend the external hinge at an angle 40 ° and turn полуось, be convinced of smoothness of rotation of both sections of a semiaxis.
2. Wrap up шлицы a tape.
3. Dress a cover on external section of a semiaxis and fix spring rings.
4. Put in the hinge and a cover fresh greasing, replace cover collars.
5. Dress a cover of the internal hinge, establish гаситель fluctuations (if it is provided).
6. Establish a holder of balls, the case of the hinge and a lock ring.
7. Put in the hinge and a cover fresh greasing, establish the hinge.
8. Establish in a flute a spring ring.
9. Dress a cover, level and tighten new collars, having entered the tool under a cover.
10. Establish полуось.