Isuzu Truper - Isuzu Trooper
1. The maintenance instruction
2. Maintenance service
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and a running gear
   6.1. A manual transmission
   6.2. Automatic transmission
   6.3. A running gear
      6.3.1. Forward карданный a shaft, semiaxes and SHRUS
      6.3.2. An internal SHRUS
      6.3.3. Removal and installation forward карданного a shaft
      6.3.4. Dismantling карданных hinges
      6.3.5. Back карданный a shaft
      6.3.6. An average support
      6.3.7. The back bridge
      6.3.8. The forward leading bridge
7. A suspension bracket and a steering
8. Brake system
9. A body
10. A body electric equipment
11. Diagnostics of malfunctions
12. Electroschemes





Isuzu Trooper>> Transmission and running gear>> Running gear>> Removal and installation forward карданного a shaft

6.3.3. Removal and installation forward карданного a shaft
THE GENERAL DATA

CARS AMIGO/MU/JAZZ, RODEO/PASSPORT AND TROOPER/BIGHORN

Forward карданный a shaft of the 6-cylinder engine with mechanical both automatic transmission and the engine 4ZE1


1 – forward карданный a shaft of the engine with mechanical transmission
2 – forward карданный a shaft of the engine with automatic transmission
3 – forward карданный an engine shaft 4ZE1

Removal

PERFORMANCE ORDER
1. Lift the car and establish on supports.
2. Put labels of mutual orientation of flanges карданного a shaft on a distributing box and on a flange of a leading gear wheel of the main transfer.
3. Remove карданный a shaft of the forward bridge for what turn away bolts шлицевого a plug flange карданного the hinge and remove a forward shaft from a distributing box. Do not suppose loss of a flange from a shaft of a distributing box.
4. Turn away bolts of fastening of a flange карданного the hinge to a flange of a leading gear wheel of the main transfer and remove карданный a shaft.

Installation

PERFORMANCE ORDER
1. Combine labels on flanges of a shaft, a distributing box and the main transfer.
2. Tighten bolts of fastening of a flange карданного the hinge to a flange of a leading gear wheel of the main transfer.
3. Tighten bolts of fastening of a flange карданного the hinge to a flange of a shaft of a distributing box.
4. Lower the car.