Isuzu Truper - Isuzu Trooper
1. The maintenance instruction
2. Maintenance service
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and a running gear
   6.1. A manual transmission
   6.2. Automatic transmission
   6.3. A running gear
      6.3.1. Forward карданный a shaft, semiaxes and SHRUS
      6.3.2. An internal SHRUS
      6.3.3. Removal and installation forward карданного a shaft
      6.3.4. Dismantling карданных hinges
      6.3.5. Back карданный a shaft
      6.3.6. An average support
      6.3.7. The back bridge Details of the back bridge Removal and installation of the back bridge
      6.3.8. The forward leading bridge
7. A suspension bracket and a steering
8. Brake system
9. A body
10. A body electric equipment
11. Diagnostics of malfunctions
12. Electroschemes

Isuzu Trooper>> Transmission and running gear>> Running gear>> The back bridge>> Removal and installation of the back bridge Removal and installation of the back bridge Removal

1. Lift the car and establish on supports.
2. Disconnect shock-absorbers.
3. Disconnect tubes of a hydrodrive of brakes.
4. Disconnect a cable of a manual brake.
5. Establish under the back bridge of a prop and turn away a nut of step-ladders of fastening of springs to a bridge beam.
6. Remove the back bridge.


1. Installation is carried out upside-down.
2. Tighten nuts of step-ladders with the moment 47–60 Н.м, bolts of shock-absorbers – with the moment 30–41 Н.м.
3. Remove air from a hydrodrive of brakes, check up oil level in картере the back bridge.