Isuzu Truper - Isuzu Trooper
1. The maintenance instruction
2. Maintenance service
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and a running gear
   6.1. A manual transmission
   6.2. Automatic transmission
   6.3. A running gear
      6.3.1. Forward карданный a shaft, semiaxes and SHRUS
      6.3.2. An internal SHRUS
      6.3.3. Removal and installation forward карданного a shaft
      6.3.4. Dismantling карданных hinges
      6.3.5. Back карданный a shaft
      6.3.6. An average support
      6.3.7. The back bridge
      6.3.8. The forward leading bridge Details of the forward leading bridge A reducer epiploon A nave with manual blocking of a drive of a forward driving wheel A self-blocked nave A reducer of the forward bridge Removal and installation of the forward bridge
7. A suspension bracket and a steering
8. Brake system
9. A body
10. A body electric equipment
11. Diagnostics of malfunctions
12. Electroschemes

Isuzu Trooper>> Transmission and running gear>> Running gear>> The forward leading bridge>> Nave with manual blocking of a drive of a forward driving wheel A nave with manual blocking of a drive of a forward driving wheel

Details of a nave with manual blocking of a wheel (cars with the wheel formula 4х4)

1 – a bolt
2 – a cap and details
3 – a lock ring and a package of washers
4 – the case and details
5 – контрящая a washer
6 – a nut
7 – a nave and a disk
8 – the external bearing
9 – an epiploon
10 – the internal bearing
11 – gear муфта
12 – a lock ring

13 – a head gear муфты
14 – a spring
15 – a lead
16 – a keeping ring
17 – a spring and a clamp ball
18 – a ring
19 – a lock ring
20 – details муфты
21 – a lock ring
22 – a ring
23 – a lining


1. Translate a control lever a distributing box in position 2Н. Lift the car and establish on supports.
2. Rearrange a nave in position of free rotation.
3. Turn away bolts and remove a nave cap in gathering.
4. Pressing a lead towards a head муфты, turn муфту clockwise and remove муфту in gathering.
5. Get a lock ring and remove a head муфты. Take the measures excluding loss of a ball of a clamp.
6. Get a spring and a ball from a head муфты.
7. Press from a head a ring.

The prevention

It is forbidden to remove this ring the sharp tool.

8. Get a spring, a lock ring and a lead.
9. Get from муфты keeping ring, having turned it counter-clockwise.
10. Get all details from the case.
11. Remove a lock ring and get an internal ring and a lining.


1. Grease a head ring муфты, an internal surface of a cap and an external surface of a head.
2. Establish in the case a lock ring and all removed details.
3. Establish keeping ring in муфту, having turned it clockwise.
4. Establish in муфту a spring, a lock ring and a lead.
5. Напрессуйте on a head a ring.
6. Establish in a head a spring and a clamp ball.
7. Establish a head муфты.
8. Establish a cap of a nave and wrap bolts.
9. Establish wheels and lower the car.