Isuzu Truper - Isuzu Trooper
1. The maintenance instruction
2. Maintenance service
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and a running gear
   6.1. A manual transmission
   6.2. Automatic transmission
   6.3. A running gear
      6.3.1. Forward карданный a shaft, semiaxes and SHRUS
      6.3.2. An internal SHRUS
      6.3.3. Removal and installation forward карданного a shaft
      6.3.4. Dismantling карданных hinges
      6.3.5. Back карданный a shaft
      6.3.6. An average support
      6.3.7. The back bridge
      6.3.8. The forward leading bridge
         6.3.8.1. Details of the forward leading bridge
         6.3.8.2. A reducer epiploon
         6.3.8.3. A nave with manual blocking of a drive of a forward driving wheel
         6.3.8.4. A self-blocked nave
         6.3.8.5. A reducer of the forward bridge
         6.3.8.6. Removal and installation of the forward bridge
7. A suspension bracket and a steering
8. Brake system
9. A body
10. A body electric equipment
11. Diagnostics of malfunctions
12. Electroschemes





Isuzu Trooper>> Transmission and running gear>> Running gear>> The forward leading bridge>> Removal and installation of the forward bridge

6.3.8.6. Removal and installation of the forward bridge Removal

PERFORMANCE ORDER
1. Lift the car and establish on supports.
2. Put ориентационные labels and disconnect forward карданный a shaft.
3. Remove forward wheels and a towing frame.
4. Adjust a road clearance, having wrapped lever bolts.
5. Remove bars of racks of a forward suspension bracket.
6. Disconnect draughts of the stabilizer from the bottom levers.
7. Remove supports of disk brakes, adhere their wire to a frame, a highway of a hydrodrive of brakes not to disconnect.
8. Disconnect spherical hinges of helmsmen реек from a pin rack.
9. Disconnect the top levers of a suspension bracket from a frame, pay attention to quantity of adjusting washers of levers and their arrangement.
10. Disconnect from the bottom levers steering draughts.
11. Disconnect from the bottom levers shock-absorbers.
12. Disconnect the bottom levers of a suspension bracket from a frame.
13. Remove a wheel nave in gathering with the blocking mechanism.
14. Remove disks and the top draughts.
15. Remove steering сошку and the pendular lever in gathering with draughts.
16. Cautiously lower the bridge, without having damaged thus hinges to a floor of axes.

Installation

PERFORMANCE ORDER
1. Raise and establish the bridge.
2. Establish steering сошку and the pendular lever in gathering with steering draughts.
3. Establish disks and the top draughts.
4. Establish a nave of a wheel with the mechanism of automatic blocking.
5. Establish the bottom levers of a suspension bracket on a frame.
6. Attach shock-absorbers to the bottom levers.
7. Attach steering bent for to the bottom levers.
8. Attach the top levers of a suspension bracket, without breaking initial quantity and an order of an arrangement of washers.
9. Attach tips of helmsmen реек to racks of pins.
10. Establish supports of disk brakes.
11. Attach draughts of the stabilizer for the bottom levers.
12. Attach bars of racks of a forward suspension bracket.
13. Adjust a road clearance, having wrapped lever bolts.
14. Establish forward wheels and a towing frame.
15. Attach to differential forward карданный a shaft.
16. Lower the car.