Isuzu Truper - Isuzu Trooper
1. The maintenance instruction
2. Maintenance service
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and a running gear
7. A suspension bracket and a steering
   7.1. A forward suspension bracket
      7.1.1. Торсион
      7.1.2. Shock-absorbers of a forward suspension bracket
      7.1.3. The top spherical support
      7.1.4. The bottom spherical support
      7.1.5. The stabilizer
      7.1.6. Bars of racks
      7.1.7. The top levers of a suspension bracket
      7.1.8. The bottom levers of a suspension bracket
      7.1.9. A pin
      7.1.10. Naves of forward wheels
   7.2. Corners of installation of wheels
   7.3. A back suspension bracket
   7.4. A steering
8. Brake system
9. A body
10. A body electric equipment
11. Diagnostics of malfunctions
12. Electroschemes

Isuzu Trooper>> Suspension bracket and steering>> Forward suspension bracket>> Торсион

7.1.1. Торсион

Greasing places торсиона at assemblage

Greasing places are specified by arrows.

CARS With the FORMULA 4х4


1. Lift the car and establish on supports.
2. Turn out from the lever a bolt of adjustment of a road clearance.
3. Put labels and remove the lever with торсиона and 3rd cross-beams.
4. Put on labels and remove торсион from the bottom lever of a suspension bracket.


1. Plentifully grease шлицевые the terminations торсиона.
2. Raise the car, having substituted a jack under the bottom lever, and press to the lever rubber буферы.
3. Enter a forward part торсиона into an aperture of the bottom lever.
4. Establish the lever of adjustment of a road clearance in such position, that
The lever termination has appeared near to an adjusting bolt. Grease консистентной with greasing that part of the adjusting lever which fastens on a frame.
5. Insert into the adjusting lever new шплинт.
6. Wrap an adjusting bolt to a label put at dismantling.
7. Lower the car and check up a road clearance.