Isuzu Truper - Isuzu Trooper
1. The maintenance instruction
2. Maintenance service
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and a running gear
7. A suspension bracket and a steering
   7.1. A forward suspension bracket
      7.1.1. Торсион
      7.1.2. Shock-absorbers of a forward suspension bracket
      7.1.3. The top spherical support
      7.1.4. The bottom spherical support
      7.1.5. The stabilizer
      7.1.6. Bars of racks
      7.1.7. The top levers of a suspension bracket
      7.1.8. The bottom levers of a suspension bracket
      7.1.9. A pin
      7.1.10. Naves of forward wheels
   7.2. Corners of installation of wheels
   7.3. A back suspension bracket
   7.4. A steering
8. Brake system
9. A body
10. A body electric equipment
11. Diagnostics of malfunctions
12. Electroschemes

Isuzu Trooper>> Suspension bracket and steering>> Forward suspension bracket>> Naves of forward wheels

7.1.10. Naves of forward wheels

CARS With the FORMULA 4х4


1. Lift the car and establish on supports. Remove forward wheels.
2. Remove a support of a brake and adhere a wire, remove a board of a brake and a disk.
3. Get from a nave полуось.
4. Расшплинтуйте also turn away a nut, выпрессуйте a tip of steering draught from a pin eye.
5. Prop up the bottom lever and disconnect from a pin bottom шаровый the hinge.
6. Disconnect from a pin top шаровый the hinge.
7. Remove a pin.
8. Brass оправкой (1) beat out a holder (2) external bearings.


1. Запрессуйте a holder of the external bearing with the help оправки and the press. At absence оправки grind off on a sandpaper a holder of the fulfilled bearing on 0,25–0,50 mm and use in quality оправки. Do not damage a new holder as the bearing can quickly fail.
2. Tighten nuts of spherical hinges with the moment 90 Н.м.
3. Establish a pin.
4. Tighten and зашплинтуйте a nut of the top spherical hinge (шплинт replace).
5. Establish a tip of steering draught from a pin eye, tighten and зашплинтуйте a nut.
6. Insert into a nave полуось.
7. Establish a dustproof cover, a brake disk (subsection 8.11 see) and a support (subsection 8.10 see).
8. Establish forward wheels and lower the car.