Isuzu Truper - Isuzu Trooper
1. The maintenance instruction
2. Maintenance service
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and a running gear
7. A suspension bracket and a steering
   7.1. A forward suspension bracket
      7.1.1. Торсион
      7.1.2. Shock-absorbers of a forward suspension bracket
      7.1.3. The top spherical support
      7.1.4. The bottom spherical support
      7.1.5. The stabilizer
      7.1.6. Bars of racks
      7.1.7. The top levers of a suspension bracket
      7.1.8. The bottom levers of a suspension bracket
      7.1.9. A pin
      7.1.10. Naves of forward wheels
   7.2. Corners of installation of wheels
   7.3. A back suspension bracket
   7.4. A steering
8. Brake system
9. A body
10. A body electric equipment
11. Diagnostics of malfunctions
12. Electroschemes





Isuzu Trooper>> Suspension bracket and steering>> Forward suspension bracket>> The bottom spherical support

7.1.4. The bottom spherical support
THE GENERAL DATA

Details of the bottom spherical hinge (cars Amigo/MU/Jazz, Rodeo/Passport and Trooper/Bighorn)

Check

PERFORMANCE ORDER
1. Lift a forward part of the car.
2. Hook a wheel mount from below and will make the effort directed upwards.
3. If the deaf metal sound is distributed or appreciable movement of the hinge the hinge is worn out is marked and is subject to replacement.

Removal

CARS AMIGO/MU/JAZZ, RODEO/PASSPORT AND TROOPER/BIGHORN

PERFORMANCE ORDER
1. Lift the car and establish on supports.
2. Remove a wheel.
3. Unload торсион.
4. Get шлицевой шплинт and turn on корончатую a nut of fastening of the hinge to a pin rack.
5. Turn away bolts of fastening of the hinge to the bottom lever of a suspension bracket.
6. Remove шаровый the hinge.

Installation

PERFORMANCE ORDER
1. Establish the spherical hinge and wrap bolts of fastening of the hinge to the bottom lever of a suspension bracket, tighten bolts with the moment 61–76 Н.м. On cars with the formula 4х2 and with the moment 93–113 Н.м. On cars with the formula 4х4.
2. Tighten корончатую fastenings of the bottom hinge to a rack of a pin with the moment 137–157 Н.м. On cars with the formula 4х2 and with the moment 117–137 Н.м. On cars with the formula 4х4.
3. Grease the bottom hinge through a butterdish.
4. Adjust торсион.
5. Establish a wheel and lower the car.