Isuzu Truper - Isuzu Trooper
1. The maintenance instruction
2. Maintenance service
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and a running gear
7. A suspension bracket and a steering
   7.1. A forward suspension bracket
      7.1.1. Торсион
      7.1.2. Shock-absorbers of a forward suspension bracket
      7.1.3. The top spherical support
      7.1.4. The bottom spherical support
      7.1.5. The stabilizer
      7.1.6. Bars of racks
      7.1.7. The top levers of a suspension bracket
      7.1.8. The bottom levers of a suspension bracket
      7.1.9. A pin
      7.1.10. Naves of forward wheels
   7.2. Corners of installation of wheels
   7.3. A back suspension bracket
   7.4. A steering
8. Brake system
9. A body
10. A body electric equipment
11. Diagnostics of malfunctions
12. Electroschemes





Isuzu Trooper>> Suspension bracket and steering>> Forward suspension bracket>> The top levers of a suspension bracket

7.1.7. The top levers of a suspension bracket
THE GENERAL DATA

Rack of a pin and suspension bracket levers (cars with the formula 4х2)

1 – a nut and шплинт
2 – a nut and шплинт
3 – a nut and шплинт
4 – a tip of steering draught
5 – a pin rack
6 – the top spherical hinge
7 – a bolt and a plate
8 – nuts of an axis of the lever
9 – the top lever
10 – a nut and a washer
11 – the plug
12 – a lever axis
13 – the bottom spherical hinge
14 – a bolt, a nut and a washer
15 – the bottom lever
16 – the plug

Rack of a pin and suspension bracket levers (cars with the formula 4х4)

1 – the forward plug
2 – the back plug
3 – the bottom lever of a suspension bracket
4 – the lever торсиона
5 – a bolt
6 – a nut and a washer
7 – a bolt
8 – a nut and a washer
9 – the bottom spherical hinge
10 – a lever axis
11 – the plug
12 – a washer
13 – a nut
14 – the top lever
15 – plates for adjustment of a longitudinal inclination of an axis of turn
16 – plates for adjustment of disorder of wheels
17 – a bolt and a plate
18 – nuts of an axis of the lever
19 – the top spherical hinge
20 – the needle bearing
21 – a washer
22 – an epiploon
23 – a pin in gathering
24 – a nut and шплинт
25 – a nut and шплинт
26 – a brake board

Removal

PERFORMANCE ORDER

The prevention

On a part of cars the top lever acts in film in gathering with the spherical hinge.


1. Lift the car and cautiously lower on the bottom levers.
2. Remove wheels.
3. Расшплинтуйте also turn on корончатую a hinge nut, disconnect the lever from a pin rack.

The prevention

Adhere a pin a wire to a frame, do not suppose pin sagging on a brake hose.


4. Turn away bolts of fastening of an axis of the top lever to an arm and remove the lever, having paid attention to quantity and an arrangement of packages of adjusting washers. Packages of washers are intended for adjustment of disorder of wheels and an angle of slope of an axis of turn. At assemblage packages of washers establish on former places.
5. Turn away a nut of an axis of the lever and remove an axis.

Installation

PERFORMANCE ORDER
1. Establish covers on a lever axis.
2. Put in rubber plugs консистентную greasing and screw plugs on a lever axis. Наворачивайте the left and right plugs by turns, avoiding greasing hit on external surfaces of plugs.
3. Tighten nuts with the moment 300 Н.м.

The prevention

Be convinced that the lever and plugs are centered. After an inhaling of nuts the lever should turn smoothly with notable resistance, but without jamming.


4. Screw butterdishes and grease details with a syringe.
5. Establish a carving tip in an eye of a pin and tighten корончатую a nut with the moment 90 Н.м. Tighten a nut to establish шплинт. Шплинт replace.
6. Establish the lever on the chassis, having tracked safety of packages of adjusting washers. Tighten nuts of an axis of the lever with the moment 45 Н.м.

The prevention

Nuts on packages of washers with smaller thickness tighten first of all.


7. Establish a dustproof cover.
8. Establish wheels and lower the car.