Isuzu Truper - Isuzu Trooper
1. The maintenance instruction
2. Maintenance service
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and a running gear
7. A suspension bracket and a steering
   7.1. A forward suspension bracket
      7.1.1. Торсион
      7.1.2. Shock-absorbers of a forward suspension bracket
      7.1.3. The top spherical support
      7.1.4. The bottom spherical support
      7.1.5. The stabilizer
      7.1.6. Bars of racks
      7.1.7. The top levers of a suspension bracket
      7.1.8. The bottom levers of a suspension bracket
      7.1.9. A pin
      7.1.10. Naves of forward wheels
   7.2. Corners of installation of wheels
   7.3. A back suspension bracket
   7.4. A steering
8. Brake system
9. A body
10. A body electric equipment
11. Diagnostics of malfunctions
12. Electroschemes





Isuzu Trooper>> Suspension bracket and steering>> Forward suspension bracket>> The bottom levers of a suspension bracket

7.1.8. The bottom levers of a suspension bracket
THE GENERAL DATA

Cм. Fig. the Rack of a pin and suspension bracket levers (cars with the formula 4х2) both fig. the Rack of a pin and suspension bracket levers (cars with the formula 4х4).

Removal

PERFORMANCE ORDER
1. Lift the car and establish on supports.
2. Remove wheels.
3. Remove bars of racks. For this purpose turn away a nut and remove an arm from the chassis, turn away a nut and a counternut, get rubber plugs and disconnect a bar.
4. Disconnect from the bottom lever draught of the stabilizer of cross-section stability.
5. Remove торсион.
6. Disconnect from the bottom lever the shock-absorber.
7. Disconnect from the bottom lever of a suspension bracket the spherical hinge.
8. Turn away a nut and оправкой from soft metal выпрессуйте an axis of the bottom lever.

Installation

PERFORMANCE ORDER
1. Collect the spherical hinge with the bottom lever, tighten bolts with the moment 45 Н.м.
2. Запрессуйте an axis also establish the bottom lever on the chassis. At запрессовке do not damage шлицевую an axis part. Tighten nuts of an axis with the moment 200 Н.м.
3. Attach торсион to the bottom lever.
4. Put on a bar of a rack the plug and a washer and insert a bar into a chassis arm.
5. Put on the second plug, establish a cup, контрящую a washer and wrap a nut. A nut not to tighten.
6. Establish a rack bar on the bottom lever and tighten bolts with the moment 45 Н.м.
7. Attach a carving part of the hinge to a pin rack.
8. Establish a wheel and lower the car.
9. Lower the car and tighten the first nut of fastening of a bar of a rack with the moment 210 Н.м., and the second nut – with the moment 67 Н.м.