Isuzu Truper - Isuzu Trooper
1. The maintenance instruction
2. Maintenance service
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and a running gear
7. A suspension bracket and a steering
   7.1. A forward suspension bracket
      7.1.1. Торсион
      7.1.2. Shock-absorbers of a forward suspension bracket
      7.1.3. The top spherical support
      7.1.4. The bottom spherical support
      7.1.5. The stabilizer
      7.1.6. Bars of racks
      7.1.7. The top levers of a suspension bracket
      7.1.8. The bottom levers of a suspension bracket
      7.1.9. A pin
      7.1.10. Naves of forward wheels
   7.2. Corners of installation of wheels
   7.3. A back suspension bracket
   7.4. A steering
8. Brake system
9. A body
10. A body electric equipment
11. Diagnostics of malfunctions
12. Electroschemes





Isuzu Trooper>> Suspension bracket and steering>> Forward suspension bracket>> Pin

7.1.9. A pin
THE GENERAL DATA

Pin and suspension bracket details (cars Amigo/MU/Jazz with the formula 4х2)

1 – a nut and шплинт
2 – a nut and шплинт
3 – a nut and шплинт
4 – a tip of steering draught
5 – a pin
6 – the top spherical hinge
7 – a bolt and a plate
8 – nuts of an axis of the lever
9 – the top lever in gathering
10 – a nut and a washer
11 – the plug
12 – a lever axis
13 – the bottom spherical hinge
14 – a nut, a washer and a bolt
15 – the bottom lever
16 – the plug

Pin and suspension bracket details (cars Amigo/MU/Jazz, Rodeo/Passport and Trooper/Bighorn with the formula 4х4)

1 – a nave and a brake board
2 – a nut and шплинт
3 – a nut and шплинт
4 – a pin
5* – an epiploon
6* – a washer
7* – the needle bearing
8 – the top spherical hinge
9 – a bolt and a plate
10 – nuts of an axis of the lever
11 – plates for adjustment longitudinal
Inclination of an axis of turn
12 – plates for adjustment of disorder of wheels
13 – the top lever
14 – a nut
15 – a washer
16 – the plug
17 – a lever axis
18 – the bottom lever
19 – a nut and a washer
20 – a bolt
21 – a nut and a washer
22 – a bolt
23 – нижный the lever
24 – a lever arm торсиона
25 – plugs
26 – plugs
* Except а/м Amigo/MU/Jazz with the formula 4х2

CARS With the FORMULA 4х2

Removal

PERFORMANCE ORDER
1. Lift the car and establish on supports. Remove wheels.
2. Establish a jack under the bottom levers and raise the car to unload springs.
3. Get шплинты from nuts of hinges of the top and bottom levers and turn away a nut so that the nut end face has appeared заподлицо with an end face of a carving part of the hinge.
4. By means of a stripper выпрессуйте a tip of steering draught from a pin eye.
5. Remove a support of a brake and adhere a wire (subsection 8.10 see).
6. Remove a board of a brake and a disk (subsection 8.11 see).
7. Disconnect the top and bottom spherical hinges.
8. Remove a pin, without having damaged covers of spherical hinges.

Installation

PERFORMANCE ORDER
1. Establish a pin.
2. Attach to a pin the top and bottom spherical hinges. Tighten nuts of hinges with the moment 14 Н.м.
3. Establish a board of a brake and a disk (subsection 8.11 see).
4. Establish a brake support (subsection 8.10 see).
5. Establish tips of steering draughts in pin eyes, tighten nuts of tips with the moment 16 Н.м. Законтрите nuts new шплинтами.
6. Establish wheels and lift the car.
7. Adjust corners of installation of wheels (it is carried out in car-care centre service).

CARS With the FORMULA 4х4

Removal

PERFORMANCE ORDER
1. Lift the car and establish on supports. Remove forward wheels.
2. Remove a brake support, a board of a brake and a disk.
3. Establish a jack under the bottom lever and raise the car to unload springs.
4. Get шплинты from nuts of hinges of the top and bottom levers and turn away a nut so that the nut end face has appeared заподлицо with an end face of a carving part of the hinge.
5. By means of a stripper выпрессуйте a tip of steering draught from a pin eye.
6. Disconnect the top and bottom spherical hinges.
7. Remove a pin, without having damaged covers of spherical hinges.

Installation

PERFORMANCE ORDER
1. Establish a pin.
2. Attach to a pin the top and bottom spherical hinges. Tighten nuts of hinges with the moment 14 Н.м. Законтрите nuts new шплинтами.
3. Establish a disk and a brake board (subsection 8.11 see).
4. Establish a brake support (subsection 8.10 see).
5. Establish tips of steering draughts in pin eyes, tighten nuts of tips with the moment 16 Н.м. Законтрите nuts new шплинтами.
6. Establish wheels and lift the car.
7. Adjust corners of installation of wheels (it is carried out in car-care centre service).