Isuzu Trooper>> Suspension bracket and steering>> Corners of installation of wheels

7.2. Corners of installation of wheels
THE GENERAL DATA

The prevention

The reason of unsatisfactory work of a steering not always is infringement of corners of installation of wheels. At first check up pressure in tyres and a condition of details of a forward suspension bracket.


DISORDER OF WHEELS

Adjustment of disorder of wheels

1 – to a forward part of the car

2 – the chassis

3 – a package of adjusting washers

The corner of disorder of wheels is regulated by selection of packages of the lamellar adjusting washers established between axes of levers of a suspension bracket and the chassis.

CORNER OF THE LONGITUDINAL INCLINATION OF THE AXIS OF TURN

Adjustment of a corner of a longitudinal inclination of an axis of turn

1 – to a forward part of the car

2 – packages of adjusting washers

3 – the chassis

4 – packages of adjusting washers

The corner of a longitudinal inclination of an axis of turn is regulated by selection of a separate package of the washers established on forward and back bolts of fastening of levers, between axes of levers of a suspension bracket and the chassis. The corner changes by increase or reduction of a thickness of a package of washers by forward or back bolts.

The corner of a longitudinal inclination of an axis of turn is regulated after adjustment of disorder of wheels.

CORNER OF THE CONVERGENCE OF WHEELS

Adjustment of a corner of a convergence of wheels

 

The corner of a convergence of wheels on all cars is regulated by change of length of steering draught.

PERFORMANCE ORDER
1. Ослабьте nuts also rotate draught.
2. After adjustment tighten nuts.
3. On cars with реечным a steering be convinced that rubber covers were not overwound.

CAR ROAD CLEARANCE

Road clearance adjustment

1 – a cross-beam

2 – a kind from outside a forward part of the car

3 – the bottom spherical hinge

The road clearance is regulated by rotation of an adjusting bolt торсиона.
The prevention

The excessive or insufficient inhaling of adjusting bolts торсиона is forbidden. At an excessive twisting торсион can break that at movement is the extremely dangerous.


Corners of installation of wheels

Year of release
Mark
Disorder corner,
Corner of a longitudinal inclination of an axis of turn,
Range
Prefer -
тельное value
Range
Prefer -
тельное value
1984-1986
Trooper/Bighorn
0 – 1 ()
0,5 ()
0,067 – 1,07 ()
0,603 ()
1987-1991
Trooper/Bighorn
2 – 3 ()
2,5 ()
0 – 1 ()
0,5 ()
1989-1995
Amugo/MU/Jazz
1,75 – 3,75 ()
2,5 ()
0,5 (N) – 1,5 (P)
0,5 ()
1991-1995
Amugo/MU/Jazz
2 – 3 ()
2,5 ()
0 – 1 (P)
0,5 ()

Year of release
Mark
Corner of a convergence of wheels, mm
Angle of rotation of wheels,
1984-1986
Trooper/Bighorn
1,98
7,1
1987-1991
Trooper/Bighorn
0 – 3,96
10
1989-1995
Amugo/MU/Jazz
0 – 4,76
10
1991-1995
Amugo/MU/Jazz
0 – 3,96
10