Isuzu Truper - Isuzu Trooper
1. The maintenance instruction
2. Maintenance service
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and a running gear
7. A suspension bracket and a steering
   7.1. A forward suspension bracket
   7.2. Corners of installation of wheels
   7.3. A back suspension bracket
   7.4. A steering
      7.4.1. A steering wheel without a safety pillow
      7.4.2. A steering wheel with a safety pillow
      7.4.3. The switch of the index of turn (the combined switch)
      7.4.4. A key of the switch of ignition and the lock of blocking of a wheel
      7.4.5. The lock of blocking of a wheel
      7.4.6. A steering column
      7.4.7. Steering draughts
      7.4.8. The steering mechanism
      7.4.9. The steering mechanism with the hydraulic booster
      7.4.10. The hydraulic booster pump
8. Brake system
9. A body
10. A body electric equipment
11. Diagnostics of malfunctions
12. Electroschemes





Isuzu Trooper>> Suspension bracket and steering>> Steering>> The switch of the index of turn (the combined switch)

7.4.3. The switch of the index of turn (the combined switch)

Removal

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. In a back part of a steering wheel turn away the screw of a cover of a sound signal and uncover, having lifted vertically upwards.
3. Turn away a steering wheel nut.
4. Put on a steering shaft and a wheel of a label of mutual orientation that at assemblage not to break initial position of a wheel.

The prevention

At wheel removal it is forbidden to strike blows to a steering shaft.


5. Remove a steering wheel a special stripper.
6. Remove a contact ring.
7. Remove both casings of a steering column.
8. Disconnect a socket from the switch of the index of turn.
9. Turn away screws of fastening of the switch to a steering column and remove the switch.

Installation

PERFORMANCE ORDER
1. Establish the switch on a steering column and wrap screws.
2. Attach to the switch a socket.
3. Establish both casings of a steering column.
4. Establish a contact ring.
5. Establish a steering wheel on the labels put at dismantling.
6. Establish a cover of a sound signal and wrap the screw.
7. Connect the battery to weight.