Isuzu Truper - Isuzu Trooper
1. The maintenance instruction
2. Maintenance service
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and a running gear
7. A suspension bracket and a steering
   7.1. A forward suspension bracket
   7.2. Corners of installation of wheels
   7.3. A back suspension bracket
   7.4. A steering
      7.4.1. A steering wheel without a safety pillow
      7.4.2. A steering wheel with a safety pillow
      7.4.3. The switch of the index of turn (the combined switch)
      7.4.4. A key of the switch of ignition and the lock of blocking of a wheel
      7.4.5. The lock of blocking of a wheel
      7.4.6. A steering column
      7.4.7. Steering draughts
      7.4.8. The steering mechanism
      7.4.9. The steering mechanism with the hydraulic booster
      7.4.10. The hydraulic booster pump
8. Brake system
9. A body
10. A body electric equipment
11. Diagnostics of malfunctions
12. Electroschemes





Isuzu Trooper>> Suspension bracket and steering>> Steering>> Steering column

7.4.6. A steering column
THE GENERAL DATA

Fixing details of a steering column

 
1 – the panel of devices
2 – a nut of the panel of devices
3 – frameworks with a teflon cover
4 – a bolt
5 – a cutting lock washer
6 – a washer
7 – a body partition

Details of a steering column

 
1 – a steering wheel
2 – a casing
3 – the combined switch
4 – a lock ring
5 – the plug
6 – the lock of blocking of a wheel
7 – a column in gathering

Removal

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Remove a steering wheel and both casings.
3. Disconnect sockets of wires.
4. Remove the combined switch.
5. Turn away a lock bolt карданного the hinge in the bottom part of a steering column.
6. Turn away bolts фланцевого connections on a body partition.
7. Remove a steering column in gathering with steering shaft.

Installation

PERFORMANCE ORDER
1. Establish a steering column.
2. Wrap bolts фланцевого connections on a body partition.
3. Wrap a lock bolt карданного the hinge of a steering column.
4. Establish the combined switch.
5. Attach sockets.
6. Establish a steering wheel and both casings.
7. Connect the battery to weight.