Isuzu Truper - Isuzu Trooper
1. The maintenance instruction
2. Maintenance service
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and a running gear
7. A suspension bracket and a steering
   7.1. A forward suspension bracket
   7.2. Corners of installation of wheels
   7.3. A back suspension bracket
   7.4. A steering
      7.4.1. A steering wheel without a safety pillow
      7.4.2. A steering wheel with a safety pillow
      7.4.3. The switch of the index of turn (the combined switch)
      7.4.4. A key of the switch of ignition and the lock of blocking of a wheel
      7.4.5. The lock of blocking of a wheel
      7.4.6. A steering column
      7.4.7. Steering draughts
      7.4.8. The steering mechanism
      7.4.9. The steering mechanism with the hydraulic booster
      7.4.10. The hydraulic booster pump
8. Brake system
9. A body
10. A body electric equipment
11. Diagnostics of malfunctions
12. Electroschemes





Isuzu Trooper>> Suspension bracket and steering>> Steering>> The steering mechanism

7.4.8. The steering mechanism
THE GENERAL DATA

Steering details (cars with the formula 4х4)

1 – a nut
2 – a bolt
3 – the shock-absorber
4 – a nut
5 – a nut сошки
6 – a nut of the pendular lever
7 – average draught

The reechnyj steering mechanism

1 – карданный the hinge of a steering column
2 – a counternut
3 – an epiploon
4 – a leading shaft
5 – a spring ring
6 – dustproof covers
7 – a lock ring
8 – a tip of lateral draught
9 – a counternut
10 – a spring ring
11 – a spring ring
12 – dustproof covers
13 – a lock ring
14 – internal draught
15 – the rubber plug
16 – the case
17 – a bearing holder
18 – распорная a spring
19 – the adjusting screw
20 – a counternut

Adjusting labels of the steering mechanism

1 – adjusting labels

Removal

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Lift the car and establish on supports.
3. Remove a towing plate (if it is provided).
4. Turn away a nut сошки, remove a washer.
5. Put labels of mutual orientation сошки and a shaft.
6. Press сошку from a shaft.
7. Turn out a fastening bolt муфты a steering shaft to the steering mechanism.
8. Turn away bolts of fastening of the steering mechanism to the chassis and remove the steering mechanism.

Installation

PERFORMANCE ORDER
1. Establish the steering mechanism into place and wrap bolts.
2. Wrap a fastening bolt муфты a steering shaft to the steering mechanism, tighten a bolt with the moment 40–49 Н.м.
3. Tighten bolts of fastening of a steering column with the moment 17 Н.м.
4. Establish сошку on a shaft and tighten a nut with the moment 196–236 Н.м.
5. Establish a towing plate (if it is provided).
6. Lower the car.

Adjustment

PERFORMANCE ORDER
1. Establish forward wheels in driving position on a straight line.
2. Release a counternut of the adjusting screw of the steering mechanism.
3. Rotate the adjusting screw clockwise to increase люфт, or counter-clockwise, to reduce.
4. Adjust люфт a steering wheel within 10–30 mm and tighten a counternut with the moment 37–47 Н.м.