Isuzu Truper - Isuzu Trooper
1. The maintenance instruction
2. Maintenance service
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and a running gear
7. A suspension bracket and a steering
8. Brake system
   8.1. Adjustment of drum-type brakes
   8.2. A pedal
   8.3. The switch of a signal of braking
   8.4. The main cylinder of brakes
   8.5. The vacuum amplifier of brakes
   8.6. Dosing out valves
   8.7. Hoses of brakes
   8.8. Removal of air from a hydrodrive of brakes
   8.9. Disk brakes
   8.10. A brake support
   8.11. A brake disk
   8.12. Drum-type brakes
   8.13. Antiblocking system of brakes of back wheels
   8.14. Specifications of brakes
9. A body
10. A body electric equipment
11. Diagnostics of malfunctions
12. Electroschemes





Isuzu Trooper>> Brake system

8. Brake system

8.1. Adjustment of drum-type brakes
PERFORMANCE ORDER
1. Lift the car and establish on supports.
2. Put labels on a flange of a semiaxis and on a drum. Turn away a nut, remove a wheel and a drum.
3. Measure internal diameter of brake drums.
4. Adjust position колодок according to diameter of a drum. Колодки are regulated by their moving by the lever by means of the special adaptation (is available on sale) before reception of the necessary diameter. If it is necessary to reduce diameter колодок it is necessary to reduce effort on распорке for what it is necessary to keep распорку a wire piece.
5. Establish drums and wheels. Lower the car. Press a brake pedal that колодки have in regular intervals nestled on a drum.